|
|
Search:
Type: Posts; User: spddmn
Search:
Search took 0.21 seconds.
-
Another option is the clutch set up from a ranger. They are still plentiful, use a throwout brg thats part of the slave cyl . You will need to run the ranger,explorer,aerostar trans but the gear...
-
Hey DR6, if your rules are the same as ours : no adjustable cam timing of any kind. Without any adjustable gears pins ect.... Soon as you (surface) the head it adjusts the cam timing. The only way I...
-
Another option is to flip the gear around. Gives a few more degrees without having to modify any pins or slots.
-
Do you have just 3 wires wired up on the tfi dist. Black, red and green? Are you running a msd box? 6a ect... If your ru
nning a msd box the tach needs to be hooked to the msd.
-
Why not just get running gear from a fox body. It all bolts up except the top struts. They will have to be modified.
-
More is always not better. I have one that was cut and flow tested. You can stop by sometime and see what mine looks like.
-
Funny if you click on the orange box next to boport it says( boport has little shameless behavior in the past)
-
Thats what I thought. Sounds like he has a 8.8 from a gt and trying to put a 7.5 in. I know the gts had more gadgets hooked to them.
-
Did the car backfire during the intial start? Could be a ruptured powervalve, maybe the float is set to high. Sounds like a rich problem.
-
Car62 the block or the head? We pulled this intake and the intake ports in the head compared to another oval port I had was considerably bigger in the runners. Whats better about the block?
I...
-
Came acrost what might be a d4 intake. I have read on here they are the best even over a efi intake. It has the firing order 1342 and after that has d4 and a bunch of numbers after that. Is this a d4...
-
Any good suggestions on the best book to buy for reading tire pressures and temps for the mustangs?
-
Never tried just changing the rotors to different spindles. I have had customers in buying our 97 98 knuckles to put on there fox body mustangs, direct bolt in. You might try calling a parts house to...
-
Same knuckle 87 88 t bird as the 87-93 mustang
-
Heres my 2cents worth. i have built 2 cars the first without the 2nd with. There is a weak point where the engine cradle mounts to the unibody. It tends to roll uder itself and kink. If you never get...
-
I would go with the ford as well. More parts eisier to work on.
Dave have you seen the new style 2.3 ranger engines? They are aluminum. Just bought a 06 would be interesting to see what could be...
-
91-96 escort /tracer with the 1.9 sohc engine
-
There are a few different set ups for the mustangs depending on year. If you can get 88 89 mounts both engine and k frame sides , you can pull all the rubber out of them and run a bolt through the...
-
Any one of these years 87 aerostar 87-90 mustang 87 88 ranger 87-88 tbird all with the 2.3 of course.
All times are GMT -5. The time now is 08:16 AM.
|
|