Search:

if it truly is meant as a safety chain and not a suspension tuning device then it should not be allowed to be tight with the car jacked up and suspension hanging on the shocks or within 1/2 inch from...

well a little update, found a cracked cylinder wall so I got a new block for this season, so new splayed caps and a line bore and everything should be good to go there. I guess i'll try the...

kinda what I was getting at was the accumulator is taking the oil from the engine while refilling and starving the engine.

brian : maybe I was doing it wrong as I would open the valve , start...

I've never ran one of these till the last season . thought it would be a good idea but looking at my bearings it seems as though my bearings look worse with it on. I ran 50 or more nights with my...

you can have them re-surfaced also

http://www.berrycammn.com/

they guy who started this place used to resurface my lifters all the time and we also used to have him build "special " cams for us...

they will work if you run the 153 tooth flex plate and the block mount starter but you can save a lot of weight if you go with the aluminum or magnesium one and the small flywheel and reverse mount...

just for my own info do you know what cam to crank is on a big block????

yes... up until a few years ago shell rotella-t 15w-40 was a very good flat tappet engine racing oil had a very high zinc content and was one of the last" off the shelf" oils with a high zinc...

I think he wants A_mod numbers not the sportmod engine.

im in minn but you call my buddy @ rocket auto electric 320-763-9660 ask for rocket. he can point you in the right direction for parts. he does all my starters and also a lot of others . he'll...

where are you located????

"wapped the old heads on this new short block.".......theres your problem.....get some new valve springs!!!!!

no. especially if you dont have enough camber gain

http://www.dirtracingforum.com/showthread.php/2165-Square-tube-headers/page10

if you are old enough to remember the days when Sterling Marlin "owned" the daytona 500 and the different sound of his...

you should have a plug on top of the left side kickout.........thats the oil level.....should be atleast 8 quarts with filter....

buy the flywheel without the built-in hub (i think they're about $50) and use the rest of your falcon stuff and you can still use your reverse mount starter, bellhousing ect. i'm not sure but i...

in wissota we can use them only if they are used with a hans type device. i would not use them by themselves. 3' belts can "dump" off of a hans device, had it happen and let me tell ya the edge of...

take your car out and put the rr coilover on upside down and run it.......see if you notice any difference ( this should change your spring height by quite a bit) now take and lower both mounting...

usually if you run out of alky its gonna lean down and backfire and pop and bang like crazy, right before it melts a hole in a piston or two!!!!!

3-4 at idle 9-10 at wot you gotta have the high dollar floats to go past that . with a two barrel you might have enough volume with that pump that you will need to control flow at wot, but you need...

with a weight jack you go by the height of the top spring plate, with a coil over or slider you go by the top heim end. where the adjuster nut is dont matter as the car rotates at the mounting bolt.

you need a retutrn line! you now have the regulator between the pump and carb and it is starving your carb big time. the regulator needs to be after the carb with a return line so your carb gets...

anyone know where i could get some engraving done on a set of aluminum valve covers???? my long time friend and engine builder passed away suddenly last week from a heart attack and i have the...

i think he meant more dirt in the carb and (more dirt in the) oil

i've been running k&n style from speedway motors (not the original K&N because i think they're too flimsy dont like that limp,...

back to top