|
|
Search:
Type: Posts; User: turner
Search:
Search took 0.57 seconds.
-
Not gonna comment on moly vs mild steel, but if you want to win, get an impressive and be done with it.Again, this years ump mod champ will be driving an impressive.The suspension should take up the...
-
The top 3 in the UMP B mod points this year will most likely be 602.Robbie Eilers has good equipment, but he can really wheel a mod.He will be the 2015 B mod Champ this year in my opinion.He doesn't...
-
With the way you are running, put street tires on it, and u will still kick there a--. LOL
-
Talk to stock car driver on her. JNJ FAB. I got a floater from him, and also a gear set, and it works great, I havent had any problems.. You won't be dissapointed in his products.Im sure there are...
-
When we ran the shock mounted to the lower A frame it would bottom out . You may need to put some washers between the lower a frame and the shock.( lower shock mount will be lower than a frame) We...
-
Make sure that if you are using a stock mount rf shock, that you space it down from the lower a frame atleast 3/8 " from my exp. I run stock car drivers setup, and it is the best thing ive ever done....
-
Very true Dave. Way to many different ford rears to say what a stock location is. One thing that our track did do is say that we had to have both lowers the same distance from the tube.Ump never...
-
The rule states stock location. I have 4 ford rearends on the farm, and all the lower mounting holes are diff from one to another.I guess Ump wants you to run the bars at the same angle, or the same...
-
-
Got the info. Thanks alot.
-
Im not sure. I have heard that they had 2.02 1.6 valves to, but my neighbor bought this truck new , so i know it came from the factory and hasn't been messed with.
-
Ahh. I got ya. Thanks for the info Jeff. I got them for free, just had to take them off.Always been curious as to what if any the diff was.
-
Just wondering what the diff is between a 487 and 487 x head.I just took a set of a 1971 chevy pickup that my neighbor has had sitting since 1988. .I ccd both the heads on the intake runner, and...
-
I thought i read that the eq heads were 15 lbs heavier, but i have never weighed them.
-
Yea. Would be good to see the 66 at a few more tracks. Should be a good year in 13.Thanks for the info.
-
Worley should just sell his spring/shock/tire/wheel package. That's what works .The 66 ran pretty good week in and week out.Wasnt as good as the 6 of hewit, but he did run well.
-
I would bet that you wont see 5 to 10 hp dif from any stock cast iron 2 barrel intake, wether its egr or not.
-
For the last few years its been around the bottom every nite, so a 733/766 would be good. When it used to be around the top, a 700 worked well. That will put ya at about 6500 or there abouts.They put...
-
So moving around 600 lbs back an inch only adds around a half percent more rear??? I was gonna move my engine back this winter, but not if thats all its gonna add.
-
Check with stockcardriver on here. Im not sure if he is still doing rearends for people,, but he knows the floaters inside and out.
-
Thanks for the replies guys. The chevy heads have to remain at 23 degree. I can run a ford, and they have to remain at 22.All the other rules are the same for the ford. Dont see anything about...
-
Our b mod rules state that we have to run a 350 oem block, and a 3.48 stock weight crank with any 23 degree iron head and a 4412 carb.Max comp can be no more than 12 to 1, and no shaft rockers, and...
-
Perf. Isn't lobe seperation ground into the cam?(cant be changed). So the smaller lsa, the more the cylinder pressure, cranking compression and effective compression?Wider will be less cylinder...
-
I understand what you are saying Perf, but a 113 lobe seperation angle cam will have less cranking compression than a 108 lobe seperation angle cam. The smaller the lsa., the more cranking...
-
I am pretty sure if you widen lobe seperation angle, from say 108 to 113 that is reduces cylinder pressure., and cranking compression.Are you sure Perf conn??? I thought the smaller the seperation...
All times are GMT -5. The time now is 09:01 PM.
|
|