Search:

Looking for a set of 5.94 rod anyone have a set they want to sell?

The north east ministock tour will be making its debut at new hampshire motor speedway on august 3rd. We will be running 25 laps on the 1.058 oval, would like to see as many ministocks there as...

The north east ministock tour will be making its debut at new hampshire motor speedway on august 3rd. We will be running 25 laps on the 1.058 oval, would like to see as many ministocks there as...

Im looking for 13x8 bead lock wheels with a 3 inch back space and 4x4.25 mustang pattern email amx6322@gmail.com

anyone out there have a set of 5.7 rods for a 2700 ford? also looking for a set of 5.93 rods and pistons for 2300.

I'm looking for a Esslinger svo intake anyone have one they are looking to get rid of?

How much for the Esslinger valve cover? And could I also get a pic of the ace header amx6322@gmail.com

Anyone out there run a Esslinger svo intake on there oval port steel head? If so what kind of mods are required to make it work? Thinking it might work with a little work but don't want to buy one if...

Can you send pics of what you have

Ok I'll do that dave how do they work are they better then the Esslinger iron intake I'm not so sure I like that one but I've only ran one once so I don't really know

I'm wondering if anyone out there would be willing to send some pictures of there homemade or modified 2300 intakes if not I totally understand just would like to have some ideas thanks scott

Looking for the following things

1. Oval port Esslinger iron head intake

2. Dry sump oil pan for 2300

3. Dry sump oil tank

4. 2500 bottom end rotating assembly or short block

Engine is a 2500 ported and polished oval port open chamber head tri-y header spinning about 8500

Wondering what kind of intake would be best for an anything goes kind of class. We are alowed to port polish cut weld and even fab if need be. Limited to using a 4412 so can't use makunis or webers...

Do you still have these carbs?

I have a 2.14 second gear pinto trans that wont go into gear was working fine this past weekend till I went to shift into 4th and it wouldn't go and it wont go into any other gear either. We have...

What year ranger starter works on the 2.3? Can't member and is it just bolt in and go or are there some tricks to making it work? Thanks in advance

Yeah sounds like the 6.75 hope you can find a cover for it I had to build one for mine

Im looking for a set of 2.73, 4.56 ring and pinion for the ford 7.5 also looking for a t loc carrier if anyone has one.

Can you send pics to amx6322@gmail.com thanks scott

im looking for a 2.7 race enginering or johnson crank. also looking for a mels distibutor and anything else you might have but really need the crank. please let me know what you have thanks

were are you located? does the motor have an arca head on it? you can pm me on here or email me at amx632@tds.net if you want thanks scott

im interested in the bumper covers both front and rear if your willing to sell them let me know and how much it would be to ship them to 03229 thanks scott

im looking for a ford 1.97 4 speed transmission bellhousing or whole transmission if anyone has one let me know thanks