Search:

I have a 1997 Harris Chassis that I have been struggling with all year. I can't get the car to roll to the RR, it will roll to the RF and hike the LR, but the LF stays flat and no forward drive off....

I bought an older Harris modified chassis and it came with the old style side Exit headers. How much power gain will I be looking at by replacing them. Pretty standard SBC 9:1 compression.

Thanks for the replies. I have widened the oil band on the lifters, I have suspected a lack of oil all along.

Has anyone tried using the Elgin roller tip rocker arms? I have been running the Comp Cams Magnum roller tip rockers but have had trouble with the pivot ball area turning blue. The Elgin rockers...

Sorry I'm not having any luck with the photo.

The geometry doesn't look right to me.

I bought a 1998 Harris B-mod and I'm not sure which spindle I'm supposed to have or what is currently on the car. I have casting numbers 369055 369056. I'm trying to make sure the geometry is close...

Update - So I took some of your advice. This week I ran LF 550 RF 600 LR 175 16" RR 175 13" with 15 degrees in the LR bar and RR flat. I finished 3rd out of 24 cars and close enough to the leader...

I also need to add, I am racing on a high banked 1/2 mile track, high momentum. LR bar at 15 degrees RR bar level.

Does the J bar have anything to do with the LR lifting? My J bar was angled down toward the chassis.

2 link with a J-bar sliders on both sides. USRA B-MOD

I have raced hobby stocks for several years and now getting the opportunity to drive a DW8 B-mod. The car handles pretty decent I finished 8th out 24 cars in my first race. My question is how do...

I am running Howard's drop in Racing spring 98213

I am running EQ heads with stock diameter 1.250 valve springs. I had bronze guides installed and now the spring damper is rubbing on what was left of the cast guide. The machine shop left that...

Upon further inspection, the rear lower a-arm mount had been damaged in the past. So I straightened it and things look much better now.

IMCA metric hobby stock is rubbing the frame during counter steer. I removed some caster trying to gain more clearance but it still hits pretty bad. Good bushings aftermarket upper a-arm nothing...

I am looking for tips on reducing drag on front brake calipers. I am running 78-87 metric stock type calipers and I have a normal amount of drag, I am just wondering if there is a way to free them...

What weight oil does everyone run? I have had trouble with the rocker arms turning blue at the pivot balls. I have been running Schaefer 10-30 synthetic should I switch back to a 20/50?

I have read numerous posts about oil, and I am even more confused now. I run imca hobby stock SBC solid flat tappet can with stock type rocker arms. I have been running Schaeffer 9000 full...

I purchased a used 602 crate for my hobby stock. Does everyone run the mechanical advanced lockout on the distributor?

Could this be my cause of cam lobe problems?

Have you been able to solve your problem? I have a set of EQs also and have lost the lobe off two camshafts, same lobe each time. I can see where my pushrods have been rubbing on the head below the...

I have been using a stock driveshaft so the balance should be close.

This is what I am dealing with.

I am not breaking the gear but I am breaking the trans Case like that and snapping driveshaft in the middle. I found the upper bushings were bad in the rear end today.