Search:

I believe the oil pump in the 99 ranger has a different pump which runs off the aux drive, not a dist drive. In fact the 99 does not have a place for a distributor. It is all elect. The pan is...

Have a nice Nissan Hardbody Mini truck for Sale. Has been running a Ford 2.3 in it this year. It can be what ever you want depending on your rules. Selling it as a complete roller less engine, Trans...

Stock rods for that crank are 5.4.

I use a double pass radiator, a big E big water pump pulley, NO restrictor, Distilled water, and a none steel plastic race fan. I run 78 to 82 with a 37degree timing and race gas, Never have a...

Ok, I got good information earlier about my carb stumble...I have a 4.5 PV, 72 Main jets, and a 30cc accel pump. Min 5 psi FP, pink accel cam, I have the accel pump adjusted properly, timing is...

thanks, I will check that.

My Cam has 274 intake and 264 exhaust at .050 it seems to run strong with that well into the high 7s to about 8. cam timing at .016 is 310/300. This is a solid roller with strapped cam towers.

I put in the 4.5 power valve, I checked my vacuum and it is a 9ish, 1/2 of that is 4.5 so I used the 4.5. I have 5# of fuel pressure using 3/8 solid alum fuel line accept to the carb and it is same...

I am going to try some stuff today. Big E, My cam card tells me my rpm range is from 42 to 82. It is a solid roller crane 300/310 with a lift of 535. It is an iron head with a very nicely done efi...

where u located. Has it ever been windowed by a rod and repaired. dannyracer6@yahoo.com.

thanks, I am going to change squirters, I have both numbers. How about the throttle cam, Is the pink one ok. I have not found out what the colors mean as to which one to use. Maybe it is just trial...

thanks, I am going to change squirters, I have both numbers. How about the throttle cam, Is the pink one ok. I have not found out what the colors mean as to which one to use. Maybe it is just trial...

when I stab the throttle, sit will give a squirt then just blahs out, If I let up on it, it will come back to idle. this is sitting in the shop. On the track I cant stab it off the corner or it will...

I have changed the jets to 72 and have installed a 4/5 powervalve. I have 5 psi fuel pressure. I have a pink accel cam, and a 21 squirter with the 30cc pump I am going to try the 50cc pump, and go...

I run the TFI distributor at 38, I am going to take out the block and use a 3.5 or 4.5 and see what it does. I will start with a 72 with the P V in. might even go to a 73. jThanks...

Thanks, Good minds run together, one of my racing friends just told me what you told me. I had not read your post yet. I will do what you guys suggested. I was also told to stay with the 30cc pump...

I need some c arb help. I am running a 2.3 .030 ford with 5.7 rods and weisco pistons. in my pro4 truck. I am running a holley 500 with a 30cc pump, 28 squirter, pink throttle cam, powervalve block...

How much for the round tooth adj pulley.

How much for the solid.

Most of the t5 trannys are either 2.34 or 2.37 second gear. rarily will you find one with a 2.14 second. The trans works well with a quick change rear end because it is easier to gear it. Otherwise...

I am looking for a good 350 cfm carb. I have a 500 to trade. don't want a builder, want one fairly race ready. The 4412 I have has a new kit in it.

Erick,
I have a bunch of the tfi distributors, I would trade you for one that is set up like that. I have been lucky so far but it might catch up with me.

You got a facebook page. If so, friend me and you c an go to my time line page and see it.

I just had my numbers done by Eric, and they are absolutely awesome, and very professional. You cant beat the price and he is quick. I highly recommend his work.

Dr6motorsports

Thanks, I will order it today.