|
|
Search:
Type: Posts; User: mod557
Search:
Search took 0.70 seconds.
-
2010 Mars type BMS former Brandon Bolchlinger house car (S# 681) Red frame and body. Set up 4/4 can 4/Z or any combination in the rear. All BSB bird cages, brake floater, and coil over eliminater....
-
What is the serial number of the car? Rear set?
-
I think I have a fair idea on the angle of the pull bar and changes made there, at least I tell myself that any way. My question is what effect would there be by changing the height of the pull bar...
-
Quick question, is there any possible way to get a close size of theses tire without actually mounting them on a wheel and inflating them. The numbers written on them don't seem to be right.
-
The car was much better, a bit loose in now. Shortened the right wheel base two turns and that helped some as well. Thanks for all the help I guess its time to just learn to really slow down on the...
-
I went to a 175 L&R spring a 6/2 left rear shock and increased wedge by 20 lbs and went to the higher gear. I only got to run about 4 laps and lost the transmission, but it felt much better while it...
-
I will flip the rear springs around, I do have a 6/2 and 4/4 shock I can try. I will go down to 5:67's and give it a whirl..
-
You are exactly right it is a BMS, I will try the stiffer springs and bar changes for sure. I do tend to run a bit lower gear than some, 5:83 on 3/8 mile. I will drop those pressures as well. Thanks....
-
Thank you all, entry is good brakes are slightly to the rear about 20 more pounds on the pressure gage. Not allowed to shut off RF brake. Loose before throttle but not as bad gets worse with throttle...
-
Pre info chevelle stub, 4bar. 650lf 600rf 200lr 175rr. 9/2lr shock 2/4rr 5/3lf 3/5rf. 52% left 57.5rear 35 lr bite. j bar 6" up at frame down a hole at pinion. 1 inch of stagger. Regardless of what I...
-
Thank you for the info, we'll have to just keep trying to figure out how to trim weight from the nose. Let us know how much of a difference you notice testing the spoiler. Thanks again
-
Modlite, interesting post. Quick question, how is anybody able to build an IMCA open engine anywhere near the same weight as the 604? We have been building them IMCA mod engines for years and cant do...
-
Thank you both very much, this is extremely helpful.
-
Well I guess I had that coming the way I asked this question. Does a stiffer front spring help fwd drive?
-
Does front spring rate have any influence on forward drive?
-
Sorry,what is a puck style pull bar I am not familiar with them?
-
crateracer16 it is tell me your mail box is full and wont let me respond.
mod557
-
90/10 mounts to a fixed point on frame non adjustable. Attach point at rear end is completely adjustable from side to side and up and down. Qustion being does moving the location of the shock side to...
-
When making a change to right side wheelbase, right lead/trail, how much of a change should be noticable? (1/4 inch 1/2 inch 1 inch, etc?)
-
On this car and many mods they use bolt on brackets (for lower link only) that shortens the lower bar, somtimes called plugs ( at least by me I guess).Without these brackets the lower link is longer...
-
First thing he is 100% correct Joel knows the most about these cars out there period. I would suggest starting out Z link on the right side of this car. Both bars 20 1/4 on right rear. You need to...
-
Hello, need a lot more info. Which rear brackets are on the car (how many holes), bar length's (bottom bar using plugs to shorten bar?) brake floater? Nova lowers? etc. Driving style? Then we can...
All times are GMT -5. The time now is 06:18 AM.
|
|