Search:

Is that outside to outside of the front wheels? I am looking at moving up to sportsman. Trying to see if I need another trailer...Thanks

How wide of trailer do you need to haul a LM without a load tire? Thanks

Talked to Isky they suggested the 292 Mega hydraulic cam. .505 lift 1.5 roller rockers with a open intake and a 750 holley

Sorry for the confusion...We can only run cast or Hyp pistons. I am most of the problem with it not hooking up...LOL I have a BAD habit OF WANTING TO MATT IT TO THE FLOOR coming out of the...

I am looking for advice on cam size and carb cfm. I run the isky lr3 and 600 holley now. Does good when I can get the car to hook up..I won a few last year. So I know what I have can win...My...

Chassis Headers 1 3/4 tubes with muffler and turn downs...

Running WP 052 76CC heads...Headers 3 1/2 outlet... I turn 6200-6500 rpm.. 7101 intake.. 4.030 bore Hyper 4 EB pistons..Hyd. Flat tappet....No roller cams just roller rockers....No compression...

Our track has opened up the rules some this year. Any Hyd. cam any carb and roller rockers. What would be a good starting point? 3/8 mild bank 2900# 3 link. Thanks

PM Sent...Thanks

I am looking for a blow proof bell housing for a SBC and fits a 3 sped sag. Thanks...

1.94 / 1.50 11/32 stem NO undercut... I turn 6100 to 6500 rpm... I used Elgin for 2 years..In 441x heads....With on problems..This past weekend I broke a valve off and drove it back up the seat...

What would be a good brand valves? B-Hobby 355. Thanks...

I am looking at getting a set of World Product S/R heads. Just wondering if an assembled set is worth the extra cost.....I don't want to buy a good set of heads with crappy valves and...

Anybody?....

I am looking to change to wide 5 set up on the front. What spindles do I need? I have a Chevelle front end with Dirt works style UCA's and stock Chevelle LCA's. Right now I use '81 Camaro...

.030 over Flat top...441 X heads...

Thanks... I already have it wired that way...

With the distributor locked out, Where would you set the inital timing?.... Just set at 32*- 36* at 3000 rpm and not worry about it or what? Never ran a locked out one ....Thanks

So all the mid 70's are the same ? When I looked up the cast number, only the Camaro comes up....I just thought that it would be better to get a new one. That you know for sure is good...

Who makes replacement spindles? 70 - 78 Only ones I can find aftermarket are 2" drop....Cast # 371676 RH. Thanks...

Has anyone used Evans waterless coolant ? Thanks.....

4BBL 600, FLAT TOP 4 BROW, 70cc head, .040 head gasket, piston .010 in the hole. Can we all stop the bickering.....The board is dead because every body hates the bickering... People come here for...

I was not wanting aviation fuel. My compression is around 9.39:1... What would I have to do to convert to PG. Jets are 76 and 34 deg total timing. Thanks....

I have a sbc 355 flat top, mild cam, 70cc 441 heads. I am thinking about switching to pump gas to cut cost. RF is $8.25 a gallon around here.....I have always ran RF in it ...What are the pro's and...

Got around to working on the car.... New master and slave cylinder and longer stud... Problem solved....