Search:
Type: Posts; User: tbklogger
Search:
Search took 0.97 seconds.
-
We have had great results with both the bilsteins SZ and the QA1 50 series . Still trying to get the whole digressive-linear thing down but making progress. Use to run Pros on my sprints and found...
-
No such thing as a budget shock because you will end up buying a better shock in the long run to make up for lack of productivity . We were plagued with some real bad handling problems three quarters...
-
We now run a coilover spring on RR. What happens when you put an eliminator in front of rear and shock behind. What does this do for traction and what rate shock would we need . We now have a 175...
-
We found that if you use the carbide wheel they sell for 50 bucks and grind from inside of tire to outside edge and then around the circumfrence once that it works well . Do not be afraid of roughing...
-
You can get them down to 35 with the right homemade brew and a little time but all the problems you will bring down on your head are not worth all the effort. Your car will pick up a second a lap or...
-
anyone try chevy 95ish half ton chevy pick-up front spindles on camero clip? Took some work but got weight down to camero spindle. also can fit metric hub/rotor on with a little machine work,saves a...
-
Tried a new eliminator so that was not it besides spring would get longer when losing ride ht, ours gets shorter so its gaining wt and not holding the corner up.We run shock ahead on left rear and...
-
Got a 4link lr spring behind, z bar rr spring ahead.Does not matter what springs we run because no matter what we lose an inch or more lr ride ht while car is on track . Spring is compressing more by...
All times are GMT -5. The time now is 12:58 AM.