Search:

Yes they are.

Anyone have a guide for the Bob Pierce shocks. I bought a car with a bunch of the shocks but i'm not sure what the codes mean. What shocks for what conditions.

I'm in need of a Tilton flywheel/clutch setup for a Ford 2300cc. I'm ok with it needing a ring gear.

Is there any thing telling the electric pump to keep running? If its not calling for fuel the pump will not continue to run.

The rules say we must run the stock Pinto front clip, steering and tie rod ends and can not use offset rack bushings.. I'm tiring to correct the bump steer issue but nothing seems to change it. Is...

still looking

Wanted: tri-y header for 2300 Ford. Let me know what you have.

Speedway Motors sells a extented bearing for a Tilton/QM. Part# 605-498p. I use it with no problems. Sells for $79.99

Where are you guy's installing your over heat light sender? Ford 2300cc with a mechanical gauge in the stock location on the block. No water running into intake so that is not an option.

Thanks

Please let me know what you got. I prefer one like the header from needhp.com.

I had the same issue with a Holley 5200. It turned out that it was to rich. I would try droppng two more jet size's.

Thanks guy's. I tore it down and it was a bad head gasket. The gasket didn't have the steel ring around the oil passage and was clearly the issue. I'm going to install another gasket and shorten the...

Spent some time on the dyno today(ford 2300). We would lose about 1/2 quart of oil per dyno pull. The oil is entering the water jacket but no water is getting to the oil. The head is the same as last...

I used a pump off of a 99 Ford Escort. Has over 30 races on it with no issues. It's small and light. I used the pulley from an old smog pump to slow it down.

I have not weighed the 7.5 but I do know that the 6.75 weigh's in at 125#'s and the 8" weigh's 143#'s

Is there a problem mixing E85 with leaded race fuel? Also do you have any experience running straight E98?

Is the header still for sale?

1988 Thunderbird turbo coupe will use a rear disc brake.