Search:

Looking for a used accu force shock dyno prefer 110v model.

A little further down it says flat milling allowed. Our track techs every night, and I just dont want to be illegal what so ever we are already a top 4 car every weekend. Just looking for that little...

I'm not really interested in changing the cam in this shortblock. I know I'm sacrificing tq. In the bottom end but it does make good smooth power. I'm just looking to get a little more out of it. The...

Thinking about milling my heads to get the compression up on my southern sportmod. But dont want to go too much, I want to keep it around 160 to 165 on cranking compression. Engine currently has 130...

Looking for a good used 4412. Prefer jdr,tcc, or vdl. Send pic to 580 919 0285 thanks

Looking for a good 4412. Prefer jdr, tcc, or vdl. Send pics to 580 919 0285 thanks

It doesn't do any popping in the shop, but I did pull the header and check for leaks. It looked like #8 may have been leaking at the gasket. I swapped gasket for some remflex gaskets a buddy told me...

Have not been able to do a plug check yet. The track techs top 3 in the heat and top 5 in the feature, so we've been going through tech. I've ran autolites ar134s and just switched back to the Ngk...

After re watching last weekend's race. The car was blowing fire on deceleration early in the race, but as the header started to glow is stopped doing it as bad if at all some laps which leads me to...

I've checked everything I can think of as far as a vacuum leak. It does have copper header gaskets on it and I haven't had any luck with them before.

I'm having issues with a 355 imca sportmod engine car. 4412 carb with 75 jets and 5.5 power valve, 2701 intake , timing set at 36. The right side header is the only one that glows per video and...

Edge of axle

The birdcage on my right rear only has holes for the upper and lower bars at 3 inches from the axle. What would this effect and should i go ahead and replace with another birdcage?

Looking for a good used tach lIke a tel tach II. text (580)9190285 or pm on here

It's on an older hughes, I can move it as much a 5 inches left to right and 10 inches front to back.

What is everyone's opinion on mounting a a new fuel cell, currently switching from a 32 gallon to a 22 gallon wedge. I plan on making it adjustable for a little tuning, just wondering how high or far...

How much drop do you have in the lr

Looking for a good used birdcage for the right rear. Message me on here or text 5809190285

I'm currently having the same issue, did you ever get it figured out.

Looking for chevelle tubular lowers. Txt pics and price to 580 919 0285

It's loosing negative camber and going towards a positive

It's on a chevelle, but it's on an 06 hughes that hasn't been updated. I never could seem to get the caster down where I wanted it. I'm debating on cutting the mounts off and putting a different...

I've always just set my static camber and caster at ride height and went, but I recently got to looking at pictures of my car during cornering and it looked like the Rf stood straight up and down...

I tried running one with 2 different types of regulators that I had already on alky. Don't waste your time on anything but their regulator, as for the pumps are so eratic a normal regulator won't...

Looking for 16 or 17" full containment txt pictures and price to 580-919-0285