|
|
Search:
Type: Posts; User: SRT17
Search:
Search took 0.67 seconds.
-
Is that outside to outside of the front wheels? I am looking at moving up to sportsman. Trying to see if I need another trailer...Thanks
-
How wide of trailer do you need to haul a LM without a load tire? Thanks
-
Talked to Isky they suggested the 292 Mega hydraulic cam. .505 lift 1.5 roller rockers with a open intake and a 750 holley
-
Sorry for the confusion...We can only run cast or Hyp pistons. I am most of the problem with it not hooking up...LOL I have a BAD habit OF WANTING TO MATT IT TO THE FLOOR coming out of the...
-
I am looking for advice on cam size and carb cfm. I run the isky lr3 and 600 holley now. Does good when I can get the car to hook up..I won a few last year. So I know what I have can win...My...
-
Chassis Headers 1 3/4 tubes with muffler and turn downs...
-
Running WP 052 76CC heads...Headers 3 1/2 outlet... I turn 6200-6500 rpm.. 7101 intake.. 4.030 bore Hyper 4 EB pistons..Hyd. Flat tappet....No roller cams just roller rockers....No compression...
-
Our track has opened up the rules some this year. Any Hyd. cam any carb and roller rockers. What would be a good starting point? 3/8 mild bank 2900# 3 link. Thanks
-
-
I am looking for a blow proof bell housing for a SBC and fits a 3 sped sag. Thanks...
-
1.94 / 1.50 11/32 stem NO undercut... I turn 6100 to 6500 rpm... I used Elgin for 2 years..In 441x heads....With on problems..This past weekend I broke a valve off and drove it back up the seat...
-
What would be a good brand valves? B-Hobby 355. Thanks...
-
I am looking at getting a set of World Product S/R heads. Just wondering if an assembled set is worth the extra cost.....I don't want to buy a good set of heads with crappy valves and...
-
-
I am looking to change to wide 5 set up on the front. What spindles do I need? I have a Chevelle front end with Dirt works style UCA's and stock Chevelle LCA's. Right now I use '81 Camaro...
-
.030 over Flat top...441 X heads...
-
Thanks... I already have it wired that way...
-
With the distributor locked out, Where would you set the inital timing?.... Just set at 32*- 36* at 3000 rpm and not worry about it or what? Never ran a locked out one ....Thanks
-
So all the mid 70's are the same ? When I looked up the cast number, only the Camaro comes up....I just thought that it would be better to get a new one. That you know for sure is good...
-
Who makes replacement spindles? 70 - 78 Only ones I can find aftermarket are 2" drop....Cast # 371676 RH. Thanks...
-
Has anyone used Evans waterless coolant ? Thanks.....
-
4BBL 600, FLAT TOP 4 BROW, 70cc head, .040 head gasket, piston .010 in the hole. Can we all stop the bickering.....The board is dead because every body hates the bickering... People come here for...
-
I was not wanting aviation fuel. My compression is around 9.39:1... What would I have to do to convert to PG. Jets are 76 and 34 deg total timing. Thanks....
-
I have a sbc 355 flat top, mild cam, 70cc 441 heads. I am thinking about switching to pump gas to cut cost. RF is $8.25 a gallon around here.....I have always ran RF in it ...What are the pro's and...
-
Got around to working on the car.... New master and slave cylinder and longer stud... Problem solved....
All times are GMT -5. The time now is 12:43 AM.
|
|