|
|
Search:
Type: Posts; User: TheBandit
Search:
Search took 0.24 seconds.
-
What is the difference between the the black metering block and the standard gold/silver metering block? I was told there was a difference but I never got a reason.
Thanks guys
-
Could you send some of front and rear if you still have them?
ccam1715@gmail.com
-
Having a little trouble getting the same reading doing the one turn deal. I do realize it could be that I am not completely at the exact same angle when it rolls to TDC. Rolled it three times and I...
-
Our belt is running on the front edge of the aux pulley. We do have shims on the aux shaft but it still runs on the edge. Anyone ever run shims to space the pulley? This started when we changed...
-
Can anyone refer me to a good how to article or video? We been thinking about trying to set the bump steer for an asphalt fox body.
Thank you
-
We have found some oil in the bottom of the intake here recently. Ford 2300 with a stock intake. Any idea what's causing this? Car runs fine but never had this happened.
Thanks
-
We have been running same setup for years and has been very successful. Now the car is all over the place. Tight one lap and loose the next. The only thing I have come up with is that we have a...
-
Has anyone tried the Big bar soft spring on a fox body? If so, how did it work and where would you start?
Thanks
-
The problem was under the squirter. Thanks for all the help
-
It almost acts like the gas is draining back out of the bowl overnight. After we squirt some fuel into the carb it will start all day. Once it sits over night nothing happens.
-
When the car sits for a day we have to put a little gas in the carb for it to start. No gas comes through the squirter when we hit the throttle while the car is off. Changed carb, filter and fuel...
-
He is the pic of the combustion chamber. Only numbers was M13 next to ford symbol
-
Does have ford stamped on it. There was something weird about the numbers on it. I'll have to check that out. I have heard that ford had some marine heads. I believe this maybe one of them. I will...
-
I have came across a head that has been untouched as far as machine work. Not sure of the year but it is a closed combustion chamber. But the difference is it appears it's a little more open than...
-
What is the best way to intall these on front and back of a fox body mustang for asphalt. Anyone have pics of this. Thanks guys.
-
Found out the idle thumb screw moved @ 90 degrees from our mark. Any suggestion on how to prevent this? Thanks guys
-
I sure will Dave. We changed the power valve and going to check it this afternoon. Thanks Jerry
-
After the last two races, the car is not wanting to idle without my foot on the gas. The idle screw has not moved. Nothing obvious that we can tell except the plugs look a little rich to me. ...
-
Looking for a 1 1/2" spacer. Needs to aluminum with 2 holes. Any suggestions where I can find one of these? Thanks guys!!
-
-
What type of coil with a Mels distributor?
-
can anyone post a pic of how you did it. I have no idea and don't want to go hacking on the car until i know how to do it . thanks
-
Who builds good 7448 model Holleys. Just getting into the holley and need some suggestions. Thanks guys!!
-
Thanks Dave. Myrtle beach has adopted mayhem rules for theie ministock race with allows this setup. We will be running stock rearend. So no chance for us
-
On asphalt, will a car with the above upgrades have a significant advantage over a car without these. If so, what would be the advantages? I'm trying to educate myself on this subject. Thanks...
All times are GMT -5. The time now is 02:08 AM.
|
|