Search:

Type: Posts; User: 96racing

Page 1 of 5 1 2 3 4

Search: Search took 0.49 seconds.

  1. Thread: Trailer tires

    by 96racing
    Replies
    7
    Views
    1,002

    If they are 15", make sure you're getting D load...

    If they are 15", make sure you're getting D load and not C. I had several blowouts and after lot of research, I bought Maxxis tires and haven't had an issue since. They ar the only 15" trailer tire...
  2. Replies
    12
    Views
    2,318

    If you have either the yellow Jones all billet...

    If you have either the yellow Jones all billet fan or the yellow fan with the riveted blades, definitely get rid of it. They had trouble with both. The new Jones 3 blade is made by Race Fan. The 19"...
  3. Replies
    12
    Views
    2,318

    I have pretty much the same parts you've...

    I have pretty much the same parts you've mentioned. I have a 16AN dual pass radiator and a shroud that has about half of the fan in it. I run the Race Fan but use the three blade 19". I know guys...
  4. Thread: E85

    by 96racing
    Replies
    7
    Views
    1,425

    We used to burn about 5 gallons of race gas for a...

    We used to burn about 5 gallons of race gas for a 20 lapper
  5. Replies
    15
    Views
    1,736

    Check your PM. I just sent you something

    Check your PM. I just sent you something
  6. Replies
    20
    Views
    2,256

    Longacre sells this setup in a kit for like $25

    Longacre sells this setup in a kit for like $25
  7. Replies
    15
    Views
    1,736

    sent you a PM

    sent you a PM
  8. Replies
    21
    Views
    2,713

    Jimmy Jesmer of Pasadena MD. has a nice 15 blue...

    Jimmy Jesmer of Pasadena MD. has a nice 15 blue front rocket with fresh 2020 updates, new body and XR1 left rear four link plates. Been for sale for a while and he just dropped the price again. If...
  9. Thread: let's chat

    by 96racing
    Replies
    256
    Views
    20,314

    I believe that is the way the Brinn Predator is...

    I believe that is the way the Brinn Predator is also. When in high gear, it only turns the input and output shaft and not the entire gear cluster like the original Brinn trans does hence free...
  10. Thread: let's chat

    by 96racing
    Replies
    256
    Views
    20,314

    I spoke with the ProFab guy at a motorsports show...

    I spoke with the ProFab guy at a motorsports show last year. He said they had dyno'd a set at Hendren on Dillion Brown's 604 car and there was a gain of 5 HP. Didn't say where that HP was in the RPM...
  11. Replies
    16
    Views
    3,187

    All of the B/G stuff will work. The '15 update...

    All of the B/G stuff will work. The '15 update should give it the flat plate rack mount which has additional ground clearance. There is one more update in '18 that gives an additional 1/2" of...
  12. Thread: let's chat

    by 96racing
    Replies
    256
    Views
    20,314

    Brad, We run a RUSH 604 dirt late model. Mostly...

    Brad,
    We run a RUSH 604 dirt late model. Mostly interested in comparison between the 1" HVH that everyone runs and the newer 5/8" to see which would be the most beneficial.
  13. Thread: let's chat

    by 96racing
    Replies
    256
    Views
    20,314

    Most of the Stealths are 700 cfm and the Bakers...

    Most of the Stealths are 700 cfm and the Bakers are 750. That is what most guys around here are running. We had good success with one of the old 750 Stealth carbs that had the extra 1/2" spacer...
  14. Thread: let's chat

    by 96racing
    Replies
    256
    Views
    20,314

    Brad, I have a new question that I'm interested...

    Brad, I have a new question that I'm interested to learn about pertaining to the 604. Which carb spacer makes the most power on the dyno and which one do you recommend? And where would that power...
  15. Replies
    11
    Views
    1,229

    Call Rocket and give them the serial number. They...

    Call Rocket and give them the serial number. They will send you a setup manual with all of this info in it. I had a buddy just convert his 15 Rocket over to a modified. He took it to Brucebuilt in...
  16. Replies
    11
    Views
    2,291

    Check your PM

    Check your PM
  17. Replies
    36
    Views
    3,435

    We don't have an XR-1 but I've heard of a couple...

    We don't have an XR-1 but I've heard of a couple local Super teams that went back to 16 cars because they didn't like the 18.
  18. Replies
    11
    Views
    2,291

    I sent you a PM

    I sent you a PM
  19. Replies
    16
    Views
    1,191

    we use this and it works well...

    we use this and it works well...
  20. Replies
    5
    Views
    868

    When you buy a set from Brad at Race 1, he has...

    When you buy a set from Brad at Race 1, he has checked them and has them marked them for intake and exhaust. He charges $150 for a set. They are normally $75/set but it takes two sets to get a full...
  21. With 1.25" rotors, I have 7" from inside of RR...

    With 1.25" rotors, I have 7" from inside of RR rotor to shock mount centerline and about 7-3/4" on left side from inside of rotor to shock mount centerline. My rear was originally in an 05 Black...
  22. Replies
    27
    Views
    3,831

    Billet, I sent you a PM

    Billet,
    I sent you a PM
  23. Replies
    8
    Views
    820

    I've had issues with the heavy racing plug wires...

    I've had issues with the heavy racing plug wires before. I always swap out #1 plug wire with an old stock one I have laying around.
  24. Replies
    7
    Views
    1,060

    On a 1/2 mile track with a 6 lap heat and a 15...

    On a 1/2 mile track with a 6 lap heat and a 15 lap feature, we burned right around 5 gallons. I doubt you will be able to get anywhere near 2200# with a steel head steel block 602 and still get your...
  25. PM sent regarding the rack.

    PM sent regarding the rack.
Results 1 to 25 of 111
Page 1 of 5 1 2 3 4

All times are GMT -5. The time now is 03:05 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.