|
|
Search:
Type: Posts; User: fastcar
Search:
Search took 3.06 seconds.
-
it is the wide rf What number and c-c should I be on for that? Do I need to raise the 3" number as well or just the 4" number?
I have the rocket twm birdcages so I assume the rr numbers are...
-
the car seems pretty balanced but lacks drive off the corner. the nose is down for the most part, up in the left rear. steers into the corner and has decent side bite. It does pick the whole front...
-
how much travel should I be getting on both the 5th coil and the 6th coil. Also what is the rate spring that rocket suggest for the 6th coil? Ive been lacking a little forward traction and am looking...
-
Really just trying to tune the load curve based off rockets recommendations using the mini stacker but was concerned that it would bottom out and damaged the stacker
-
How much travel is normal for the Right Rear?
Rocket suggest 300-700 load at ride height but what is a typical load that the right rear will carry?
I purchased the new mini stacker setup from swift...
-
What’s everyone’s thoughts on a short lift bar. Something like 29” 31” 33”
Heard that the XR1’s are switching to it and that rocket recommends it for all there cars now(haven’t actually talked to...
-
I have a set of dart 230 49cc With jesel rockers and and Edelbrock intake
Call or text if interested.
740-237-0369
-
I originally thought it was just dirt but it definitely jumped a thread and cross threaded. Thanks for the help. I'll get some thrust bearing and try that
-
Anyone have trouble with the adjuster nut cross threading while running a stacked spring on the LR. The spring is really preload and when adjusting it will cross thread. Did it once and replaced the...
-
That might be my only solution. Really hadn't thought of doing it that way. Thanks
-
Anyone converted a Barry wright fuel cell to top outlet to comply with the Lucas oil rules? Called Barry about it and they said they don't make anything to do it. Fuel safe makes a kit that looks to...
-
$1500 bare frame Lowers and spindles
-
-
Can be sold as bare frame
-
06 rocket roller
Minus drivetrain
New black body
Call Tim Logan 606-831-6868
-
Seen some talks about clambering the rr. Thought about it a couple years ago but seem to hear more about it now. Are guys doing it? Is it that much of and advantage? How many degrees and what all...
-
Had to park the car for the rest of the year to save money after being laid off work this week. Hopefully try these changes at the beginning of next year if I go back to work. Thanks again for the...
-
Thanks for the help. I think you have pointed me in the right direction.
-
Running integra rf high rebound os on both front shocks
I agree I believe the lr drop is 1" too much, that might be what the problem is
Do you think moving the 5th coil back will help lift the...
-
Lr drop 14"
5th coil 38" out
Lr top bar short bar 16 3/4"
Lr top bar 45* at full drop
Rocket 1 4 link brackets
Always ran j bar bottom of pinion, never heard anyone doing anything any different
-
54% left side
55% rear
180 LR bite
-
Can't seem to keep the lf done on the ground when the car has traction. When the car seems to have enough traction to get off the corner, the lf and rf picks up and the car won't steer. Any ideas on...
-
I understand the effects of adjusting rebound on the lift bar, but what does more or less compression on the lift bar do in different track conditions. I found that my shock was bad and used a spare...
-
Why are they putting them on the orange cars and which side are they putting them on
-
Bought a car from a top mid west driver and got some spare parts with it. There were 1/2" longer lower ball joints included and was wondering if anyone new what the we're using them for. Not sure if...
All times are GMT -5. The time now is 01:44 AM.
|
|