Search:

track is a tacky high grip 1/4 mile ---sweeping turns----if car is right you can flat foot all the way around. Yes the car would not turn in well at all---neither on throttle or off but worse off...

How low on the rf spring can i go to get more rf bite at turn in without going too low. car has no bite at turn in on or off the throttle. good in center and exit. springs lf 450, rf 325, lr 175 (14...

Very good car and also very fast, nothing wrong with it, just looking to get new car for 2015. Comes turn Key with a 604 crate motor or can be bought as a roller. Motor is NeSmith legal

Car has...

update----Well we raised the lead up to camshaft height on the vertical bar in the center of the car toward the front--close to transmission area. It changed my left side to 54.6. Also dropped front...

My left lower bar is in the next to top hole right now on the jack stands with full drop----chain is tight (13 inches) and my angle is 33 degrees ----i dont think it will make it to 45 degrees going...

I forgot to post my bars and ride heights ----ride heights are lf-3 7/8, rf- 3 3/4, rr- 7 1/2 lr 7 3/4 bars are lu 3 down(standard), ll-1 down ( 3 above standard) ru 3 down (standard) rl ...

I was going to change the right front spring to a 325 and try that. it may very well be hitting the bump very quickly. I will check the angle of the ll bar tomorrow night when i am at the shop....

Thanks guys for taking the time to read and help with this problem. I just went and jacked the car up from under the drivers butt and it has no binds and it looked just like all the other cars do on...

I have have owned 2 different cars in 2 years and both have trouble getting up on the bars. The biggest thing i notice is under caution and the cars weave back and forth and all the cars will hike up...

Is this motor still for sale??

Where are you located?

Thanks guys for all the help. Sounds like my j bar is where i will try next. I have never gone above the pinion----only even with it----i dont know enough about bump stop to say anything except it...

Matt----please give me your baseline setup that you would recommend leaning toward the free side----our shocks are new integra double adj set up for our car by WAR. we are on bump on rf. --- on...

This weekend the car was tight on throttle. It would not turn in and the track was hammer down---never lift throttle!!!! the bars are right upper----top hole, right lower--- top hole, left upper...

The car acts like it never slips the left rear. When the track gets slick we are real good but we are terrible when it is heavy. and it gets worse if i have a good left tire on. we have been fastest...

I have a 2010 mastersbilt smack and I cant get it free enough getting in the corner or center off. This weekend I had this setup springs lf 450 rf 275 on bump, lr 175 14 inch rr 225 53.8 left,...

2007 crate grt roller for sale. good condition ----- all you need is a motor and trans ----will sale for 4500.00 or same value in trade

where are you located.

where are you located??