Search:

put the left rear on a clamp bracket infront with shock behind

we ran a 3 link cars years ago and had good luck with the jbar on the left and same spring locations you have until we took the left spring off the swingarm and clamped it up and that car was a beast...

I work on a friends mod and we used to run those back in the late 90s and early 00's we had real good luck with them till they went to the 3 link then we changed to pierce. Think we still have some...

We shut the fuel off after the races are over and let the carb run out of alcohol and when we get back to the shop we fill the front bowl with gas so when we start it the next time it fires right off...

We run clamped on left with right spring on top of housing 4bar on both sides

SS Motorsports hit the nail on the head. We been doing it that way for years. Roll the front part out and from the joint of the door and quater back roll it under :)

we had this problem in our mod a few years back and come to find out there was a piec of tap that was floating around in the tank and it did the exact same thing yours is doing just something else...

Same as above 3 at idle and 9 at wot for alky with the regulator on the back of the log and guage line coming out of middle of log is how we run ours also with no problems

It's been along time since i herd of a kosisky mod but whe ran them for 5 yrs i think back in the day, but if i remember right we used to check the front ride heights from the bottom of the stub...

10 left side,12-rf and 14-rr and check heat across the tires after each race and adjust accordingly

I orderd th HD Hero 960 and am lookig forward to trying it out next week. Thx for the info again guys

Thx for the info guys i appreciate it. Was hoping the cost would be worth it as well as the info there is to be gained by trying this thx again

Thank's for the info Crate i appreciate and i'll be checking into that camera

Was wondering if anyone has used one on here and what brand if so. and if the expence and time involved was worth the information you were able to obtain? thx in advance for any help it is greatly...

Was wondering if anyone has used one on here? and if so what brand did you use and did you learn enough info to justify the expense and time to do this? thx for any info it is greatly appreciated