Search:

looking for sources for steering arms for 3 pc vette spindles....

I would stay away from the crankcase evac as this can pull oil off the top of the valve (bad). more drainback is always better ,especially if you flooding the top w oil. JMO

thanks...i put climbers on there because the pierce brackets are like 1 1/4" between holes and just wanted some fine tuning with the straight bar..usually don't change the angle, just slight up or...

looking for the actual angle bob...i put climbing brackets on both pinion and frame

i put climbing mounts on my clamped up Pierce car.what angle is the starting point for it @ ride height...thanks in advance guys...

sold//////////////////////////////////

older style w hubs brakes pierce brackets.60 in centered 5x5 .4:86.good shape $700 Near Decatur,IL Email only plz alanhead14c@yahoo.

the spacer fits over the splines so yoke butts against or small diameter between end of shaft and bottom of yoke bore?

I had same problem.New yoke had different dust cover causing interference w pinion bracket.also saw a question on here that refrenced long vs.short yoke.i am running w/out dust cover...

If its pin angle you would need slightly longer upper a arm to get static camber setting, resulting in less camber change during travel....

Price reduced..roller w rad,shroud,hosess fan spacer.1 yr old 1 3/4 -1 7/8 step headers,driveshaft,springs and shocks as ran,gauges,cell,battery cables,spare bumpers.spare uppers,3 link tubes,extra...

car still for sale

btt//////////////////////////////////

found them at Holley.com...........

btt.......................................

I have a couple holley/edelbrock fuel pumps,want to rebuild them.Anyone have a source for the kits? Thanks...

Macon Farmer legal.Complete roller minus seat, belts,ignition,and gear. has battery cables,wiring, gauges,radiator,mid plate, driveshaft,headers,wide 5 car. 3 link coilover.Mastersbilt w camaro stub....

bought a used adapter to plumb an oil cooler, looks like a moroso unit.it seems to me that the oil path splits into filter and to the port out.is this correct?

going on my 3rd year w a used brinn, got 1100 in it incl. new coupler.had to put a bushing in the tailshaft....i would recommend this to anyone as well worth the money...

Those balance plates wont work, they screw up the way the coupler and flywheel sit on the crank.good for stock flexplate w a torque converter....

still 4 sale...................................

toter home and enclosed trailer???

Battery currently mounted high on left side.I can move cell forwards 2.75" w/out moving battery, but can move it close to 6" if i relocate it to right side.What do you guys think?I like the idea of...

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,btt'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

/////////////////////////////btt/////////////////////////////////////