|
|
Search:
Type: Posts; User: newguy
Search:
Search took 0.72 seconds.
-
I see most cars run a LR brake floater, my car is set up with the brake on the birdcage. Can you guys explain what the pros and cons of each setup is.
-
Can you get a mid plate or mid mounts in when its stock location, stock firewall and stock exhaust?
-
-
I have a Rearend out of a sportsman/pro stock type car. The car ran nova lowers and I'm guessing that's why the rear is wide. It is set up with the metric mounts from medieval chassis already. Can...
-
I don't think that they would hold up. Part of the trick to this is re arching. Re building the spring itself
-
been running e85 for a few years now on an open motor. Pulled the trigger and got a 604 for this year. Im wondering if i should continue to run E85 or go back to methanol? One crate supplier told me...
-
Hey guys, I'm running a outlaw style pull bar from bsb. I'm wondering how much preload I should have in the spring? And how much on the biscuit? Also 90/10 shock or no? Thanx for any help
-
looking to buy a mechanical fuel pump, not sure on if i should get a 120 gph or 130 gph, and also what psi is recomended. thanx for the help guys
-
-
Making the switch to e85 from methonal. I want to drop fuel cel down in size and am wondering if a 16 gallon cell is going to cut it?
-
Looking into going with a buiscuit pull bar. What seems to be the hot ticket right now?
-
Thanx for the reply's did you have to mess with the ultra? Or was it close out if the box?
-
I am leaning towards running E85 next season and was wondering if anyone is running the ultra HP, and their thoughts about it?
-
I'm a big guy with a short neck, I was hoping to get some insight into what works for you guys in the same boat? Or does it even matter?
-
What's the maximum amount of left side % you can run? Is there a sweet spot?
-
Sorry guys I was away for the weekend, at ride height the Lr upper is 30 degrees and the Lr lower is 5 degrees. at full hike the rearend has 5" of travel and the upper is at 50 degrees, the spring...
-
Car is loose from center off,
-
What's the rule of thumb for setting the chain? Right now I have a a lot of travel and I've been fighting a loose condition. Could this be a cause?
-
That's good because the car has been loose through the center, thankyou
-
I've noticed that I am the only one at the track not running a coil over on the RR. The car came with a slider and the shock is behind, what could I expect by simply putting the coil over on?
-
when starting in low gear, are you supposed to ride the clutch pedal until its time to shift into high? On mine as soon as i lift off the pedal its automatically in neutral. I thought that at a...
-
it has a mount on a hinge that the sub belt also attaches to, I laid my seat back a little more, teaked the steeing shaft mount to raise it up, and orderd a smaller steering wheel, i also got some...
-
I've got a 2013 jet, 20 degree seat set all the way against the back firewall, kicked out at the bottom, and with my helmet on I have about 1" I am not comfortable with this at all,
-
What's the rule of thumb for head clearance on a mod? I'm talking bottom of halo, to top of helmet.
-
thanx for all of the replies guys. I called dyers and your looking at about 900 for a used set. I think ill give Ohios rods a try.
All times are GMT -5. The time now is 10:48 PM.
|
|