Search:

Pump is sold!

Wulff 4 stage oil pump with pulley and belt. Purchased new beginning of last season and used 5 nights. Going limited late racing is reason for selling. $650.

262-225-1445

Yes I was warming the engine in the shop. Just very confusing as it has never done this before. I will check level tomorrow and try again. It left a 4" diameter puddle after about 10 minutes of...

I have a newer Gen 1 Bert. This just started. Oil coming out the plastic air vent. What should I look for? Bad vent? Did not have time to investigate. Back to the shop tomorrow. Any help is...

I tagged the wall with the RF and tore the spud for the strut out of the front crossmember. I am going to fab a new one. Need the exact center to center distance between the lower control arm...

I have an 04 smackdown and need to replace some tubing. Were the chassis built using mild steel or did they use anything else then? Thanks

Looking for opinions on tapered carb spacer. HVH or Wilson? Or is there another one out there I should know about? Thanks in advance.

I will spend more time with it this weekend and see what I come up with. This is on a 04' smackdown. I have the setup manual and everything is per the instructions as far as shims on both ends of the...

That was my first thought that caster is changing. That is on tap for this week. Checking for caster change. Thanks

This has really been frustrating. I was hoping someone could explain or help. I keep checking over and over because I think I am doing something wrong. I will spend more time with it this week and...

Looking for opinions on bump steer gauge, single vs. dual dial indicator style. I have always used the dual and not sure the accuracy of the single. Using the dual I just note the difference in...

Getting ready to have my Wissota engine freshened. I run the big bore/ short stroke combo. Just want to make sure this will be legal next year. Don't want to spend the money and find out I can't run...

Thanks for the help

It is a Gen 1 aluminum case.

Probably time to come out. Have to bang to get in low and reverse. And hard to find the sweet spot to get into high. What should I look for? Easy to get parts if needed? Thanks in advance.

What is the best fan to run on a super late?

Seymour was a tri-oval also. Now has traditional shape.

My car came with clear fuel hose on the return line to the cell from KSE pump. Where can I find this and know that it is compatible with methanol? I am having a hard time finding any.

This has been a good post. I purchased a turn key late model with a Wissota engine on methanol. It had 2 return lines, the one off the pump with the .160 pill and one off the log with regulator which...

And in my case it is!!!

http://shop.kse-racing.com/TechDocs/KSE%20Tandem%20Pump%20Installation%20Guide.pdf

Thanks that is what I was looking for. Was not sure if nut goes into housing. Thanks.

New to Bert trans. Older Bert. Looking at the trans where shift linkage connects, which is high/low and which is reverse the top or bottom? Using the shifters I can get both to move forward...

Should you prime when you do oil and filter change? Or do you crank engine to get pressure? Thanks.

Looking for recommendations on who makes the best performing billet gas carb. Engine is a Wissota 362, big bore short stroke. Thanks.