Search:

BSB work great and are extremely strong!! Just make sure u measure your axle tube because u can get different id sizes on the bearing and u need to makes sure u get them to slide on nice and free.

W.A.R shocks warshocks.com look em up we had good luck with them.

I dont like the break on the doors so we just role the door out with the middle brace.Ill post pics when we get the body done later this week

That yellow car looks crazy wide i know there is no way we have that much room between the snout bar andout side of the body and our body isnt close to legal

no just a clamp bracket

Give the guys at war shocks a call, we ran the bsb black pkg for 2 yrs. then a guy running war shocks told us to try getting war to re valve our shocks when we bent a couple not bashing the bsb...

Bite is crazy high i would try to back it down to atleast 40 if not less, the car is a 4/4 car correct. Also we had this happen before r slider was binding pulled it off checked it and it didnt feel...

Droping down to 8 i would bet its the battery on one of the terminals on top throw in a battery u know is good and try it just to make sure if that dont fix it start cheking wires and clean...

Put a meter on the starter and check voltage make sure u got atleast a good 12v there if u do hit the starter and c what u have then if its droping out really fast its the battery most of the time....

We use 1/4in bolts in the chain to fine tune it

What is the reason behind the holes whats it help?

Have heard that style of sail panle is better for getting air to the spoiler, im not 100% sure though we run big sail's still i like the look alot better

Have talked to shaw about this and they said it will tighten the car we have never ran this set up yet but may try it when the tracks get slick

Is the lr bottom at ride height if u have a few inches of travle u will b fine there and the rf will bottom out on most cars

At ride height we have 2 1/4 u may need to go to the longer yoke i know when we ran a short one one night when we would come off the throttle we would get a vibration do to not enough yoke n the...

Moving a bar up on the chassis should not pull the birdcage fwd atleast on r cage it dont bk of the ark that the holes r n

Have u tried any simple adj. like add fuel,wheel spacer or maybe shortening the right side just a bit just some things to think about that have worked for us.

Also thought it was .005

Dont go with a quickfuel have seen to many problems! Willys would be the way to go u cant find better people to talk to or race with

We run a emod class and run a healthy 602 and run a hi hp track. When the track slicks off r lap times r not to far off the open mods. Just a few thenths so i would say it would be possible to run...

If by bite you are meaning the diff between left and right rear wheel weight we have ran for 40LR to 10RR

Get the gates green stripe hose the spring cant come out

I thought the offest was the location of the center chunk being offset not just moving the rear end over

What r your wheels weights?

We run 10 left 15 right also small engine