Search:

Putting in a block mount pump and steering box. Anyone have a picture or diagram or a link that shows the outlets and inlets? It's a metric box. Thanks

Looking to buy used Hoosier 500 or 500h tires need a set. Maryland, Virginia or PA would best to avoid shipping. Steve

Im leaning towards lazermod3. Sounds like cam lever/spring adjustment. If you have a high idle you tend to use up a lot of the cam rotation, so when you hit the loud peddle there's not as much to...

http://www.blindrivetsupply.com/Recoil-14-32-UNEF-Thread-Repair-Kit-10-Inserts-In-Kit-34040-32_p_3626.htmlI'm not familiar with the Rochester carb. So not sure if you have the room for a helicoil...

I ran a red pump on a 351c. 5-6 psi at idle but dropped to zero at around 5500 rpm. If you can manage a fuel gage outside the cowl or with an isolator to see what's going on that's your best bet.

Maybe look towards the red pump. My guess would be fuel pressure/flow.

Do you run a secondary metering plate? If the float was super high I could see where fuel could roll up the vent tube. But that would be a very high float and a very quick stop. Holley sells a...

I would lean toward float as well. With a quick lift you might be getting fuel surge, no where to go. With a high float level I could image a flood situation. 2 barrel or 4?

Thanks again for the replies guys. Going to go ahead and put the coil switch in. The dist is locked out. So I think that's a good addition. Might let me put the advanced back in her. Also will plan...

Thanks for the quick replies. Yes, it has the spacer plate in place. Also have the correct bolts. I've never had alignment problems on any small block fords when it comes to starters. Sb chevy? ...

Hobby stock thunderbird with a 351 and a C4. Starter was going bad, bendix. Went to replace it last night and went for the easy bolt first, the bottom, figuring save the top bolt for the 10...

Thanks for the post. I can't run an msd box. have msd 8.8 wires, car and distributor is ford. The current coil is stock, with the nail head style attachments on top. Has a snap in deal that is super...

All things being equal. With an all stock ignition system is there any benefit of going with a performance coil?

I live in Maryland, I will try the scan mode. With a new battery and several sets of head phones and ear plugs I have not been able to hear anything, even static.

Does anyone know of a way to test a receceiver without being at the track? I have one of the fusion units, several years old trying to see if it work or not. Thanks,Steve

Thanks guys. I was trying to avoid using adapters as I did not want the probe tip too far out of the water path. some google searching came up with a 1982 - 1989 gm truck temp sensor. 230 deg with a...

swapped manifolds and the new one has 3/8 ports. anyone have a part number for a 230 warning sender with 3/8 threads. long acre makes a kit that is 3/8 threaded but all I need is the sender.

Question, one track says battery ONLY in the trunk. Two other tracks say battery in the stock location, or inside driver compartment. it's currently in the trunk, don't like the idea of a bucket of...

heat gun works great. putting a 15 year old hobby stock back on the track. I figured the stickers would have to be sanded off. figured nothing to loose, try the heat gun. worked great.

When I bought my modified it came with several sets of rims and tires but I have no way to tell the age of the tires. Between grinding and tire preps do tires ever get too old?

That is an excellent idea! My fear was having to undo it at the gauge. It's a tight fit working behind the dash and I tend to do work back ther be feel rather the "seeing" what I'm doing. Plus I...

Whats the best way to bleed an isolator for a fuel gage? Did a search but nothing came up. Wondering if I should put a T fitting in close to either the gage or the isolator? Also what are people...

Same question here. I made up an automatic roll off system for my gopro. Currently a prototype but getting ready to cut tooling for the production piece and it would be nice to have a heavier duty...

Good enough for me. Changed it is. I figured something was up since they no longer made this version. I liked the Facebook page a little while ago, love the tip posts.

Most of the way through the rebuild on my modified. I have the M/C peddle set-up and shifter left. I took the pedal assy unit out, looks like the first time its been out of the car (2005...