|
|
Search:
Type: Posts; User: dannyracer6
Search:
Search took 0.54 seconds.
-
I believe the oil pump in the 99 ranger has a different pump which runs off the aux drive, not a dist drive. In fact the 99 does not have a place for a distributor. It is all elect. The pan is...
-
Have a nice Nissan Hardbody Mini truck for Sale. Has been running a Ford 2.3 in it this year. It can be what ever you want depending on your rules. Selling it as a complete roller less engine, Trans...
-
Stock rods for that crank are 5.4.
-
I use a double pass radiator, a big E big water pump pulley, NO restrictor, Distilled water, and a none steel plastic race fan. I run 78 to 82 with a 37degree timing and race gas, Never have a...
-
Ok, I got good information earlier about my carb stumble...I have a 4.5 PV, 72 Main jets, and a 30cc accel pump. Min 5 psi FP, pink accel cam, I have the accel pump adjusted properly, timing is...
-
thanks, I will check that.
-
My Cam has 274 intake and 264 exhaust at .050 it seems to run strong with that well into the high 7s to about 8. cam timing at .016 is 310/300. This is a solid roller with strapped cam towers.
-
I put in the 4.5 power valve, I checked my vacuum and it is a 9ish, 1/2 of that is 4.5 so I used the 4.5. I have 5# of fuel pressure using 3/8 solid alum fuel line accept to the carb and it is same...
-
I am going to try some stuff today. Big E, My cam card tells me my rpm range is from 42 to 82. It is a solid roller crane 300/310 with a lift of 535. It is an iron head with a very nicely done efi...
-
where u located. Has it ever been windowed by a rod and repaired. dannyracer6@yahoo.com.
-
thanks, I am going to change squirters, I have both numbers. How about the throttle cam, Is the pink one ok. I have not found out what the colors mean as to which one to use. Maybe it is just trial...
-
thanks, I am going to change squirters, I have both numbers. How about the throttle cam, Is the pink one ok. I have not found out what the colors mean as to which one to use. Maybe it is just trial...
-
when I stab the throttle, sit will give a squirt then just blahs out, If I let up on it, it will come back to idle. this is sitting in the shop. On the track I cant stab it off the corner or it will...
-
I have changed the jets to 72 and have installed a 4/5 powervalve. I have 5 psi fuel pressure. I have a pink accel cam, and a 21 squirter with the 30cc pump I am going to try the 50cc pump, and go...
-
I run the TFI distributor at 38, I am going to take out the block and use a 3.5 or 4.5 and see what it does. I will start with a 72 with the P V in. might even go to a 73. jThanks...
-
Thanks, Good minds run together, one of my racing friends just told me what you told me. I had not read your post yet. I will do what you guys suggested. I was also told to stay with the 30cc pump...
-
I need some c arb help. I am running a 2.3 .030 ford with 5.7 rods and weisco pistons. in my pro4 truck. I am running a holley 500 with a 30cc pump, 28 squirter, pink throttle cam, powervalve block...
-
How much for the round tooth adj pulley.
-
-
Most of the t5 trannys are either 2.34 or 2.37 second gear. rarily will you find one with a 2.14 second. The trans works well with a quick change rear end because it is easier to gear it. Otherwise...
-
I am looking for a good 350 cfm carb. I have a 500 to trade. don't want a builder, want one fairly race ready. The 4412 I have has a new kit in it.
-
Erick,
I have a bunch of the tfi distributors, I would trade you for one that is set up like that. I have been lucky so far but it might catch up with me.
-
You got a facebook page. If so, friend me and you c an go to my time line page and see it.
-
I just had my numbers done by Eric, and they are absolutely awesome, and very professional. You cant beat the price and he is quick. I highly recommend his work.
Dr6motorsports
-
Thanks, I will order it today.
All times are GMT -5. The time now is 11:13 AM.
|
|