|
|
Search:
Type: Posts; User: Rocketman1187
Search:
Search took 0.69 seconds.
-
on the stop and go part i would definitely advise going to a pullbar verses the liftarm. Kelly is a very good guy to deal with. Nothing wrong with a 110" wheelbase car. That is what all the newer GRT...
-
i have a 2011 and a 2013 grt and the LR ride height should never be lower than the RR. You should have about 35lbs of lr bite at 13.5" distance between upper frame rail and top of rear end axle tube.
-
-
Looks for either 6:1 or 8:1 sweet steering box. Also looking for beyea tri y headers for new GRT mod. Also looking for easy edger or electric bead roller. Call or text 5013221235. Or post on here
...
-
Looking for tri y headers for a 2011 grt mod. 23 degree standard bolt pattern head. Let me know what you got. Call or text 5013221235
-
64cc 200's on both sets. located in central arkansas
-
Set of bowtie gm angle plug heads. ported and polished by gaerte racing engines. heads are set up for roller cam. Come complete heads are disassembled so you can check them out. 400 firm.
set of...
-
Looking for a set of Tri y headers that will fit a Hoffman car. Let me know what you got. 5013221235
-
Been on 4 bar lr and 2 bar rr switching over to 4-4. Does anyone have some bar lengths (center of heim to center of heim) to get my wheelbase close to right. Thanks a ton! If you don't want to post...
-
i have the most possible angle to put in it... highest point on rearend and lowest point on chassie.
-
short pull bar 24"... angle is about 20 degrees
-
I have a 07 hoffman car. I can get in the corner good with good side bite car is not tight turns in good and thru the center but it has no traction fron the apex to about 100 foot before the flag...
-
Looking for a nice used enclosed trailer. Not looking for anything with living quarters because i want to haul two cars. Please let me know what you have. You can either post on here or call me at...
-
Looking for a nice used enclosed trailer. Not looking for anything with living quarters because i want to haul two cars. Please let me know what you have. You can either post on here or call me at...
-
-
I am needing a complete reverse mount setup asap! if you have one please call 5013882980
-
2009 shaw by taylor on OEM chevelle stub not aftermarket. car has 6 races on it since new never bent or clipped. car can come in many stages of completeness. car has
*Howe balljoints
*Taylor...
-
where are you located and how do i contact you?
-
well thats kinda what i thought but on the packaging of the new afco nuts it says "afco 9" GN spanner nut" so i know thats the proper nut and i bought the nuts from larry shaw race cars and they said...
-
Ok guys need you help. I have a 9" ford rear end that i took the hubs off of to put a different style birdcage on. While taking off the spanner nut (nut that holds on the hub) i noticed that the...
-
Need a seat ASAP! looking for a nice 15-16 inch seat. Not wanting something ripped up and tore up with 4000 holes drilled in it. call or text 5013882980
-
actually i tried calling two or three times. I just wrote it off as a loss. You should post a picture so everyone can see what they are purchasing... anyone who has a extra pair of vise grips and a...
-
This tool is a joke! I bought one with high hopes paid 35.00 for a Chinese off brand pair of vise grips with a little metal tab welded on and 7 of 10 times it rips the metal. I tried for hours to get...
All times are GMT -5. The time now is 12:07 AM.
|
|