Search:
Type: Posts; User: outofcontrol
Search:
Search took 1.25 seconds.
-
Rodeck block 4.145 bore 350 mains needs 1 sleeve $1000 call or txt 740-294-7525
-
-
Got a pit lift that's been used maybe 10 times works great comes with the dewalt toolbox that's plumed and wired up $1500 Call or txt 740-294-7525
-
Has new (not a nice word)(not a nice word)(not a nice word)(not a nice word)pit and deck all new front suspension new 4 link rods and Heims fresh powder coated chassis has winters 4:11 quick change...
-
-
Set of ohlins canisters fresh from accuforce 4 corners and adjustable lrf ohlins $2000 call or txt 740-294-7525
-
Bert bell housing never cracked or welded on practically new $400 call or txt 740-294-7525
-
Sb2 heads has new titanium valves new guides 150 laps ago jesel shaft rockers 2 piece intake valve covers ready to bolt on $3000 call or txt 740-294-7525
-
Has new (not a nice word)(not a nice word)(not a nice word)(not a nice word)pit and decking freshly powder coated chassis all new front end new Heims threw hole car 4:11 light weight winters quick...
-
-
Steel pit lift used around 10 times with tote to carry the pump in and has a deep cell car battery $1350 call or txt 740-294-7525
-
-
At ride height sitting on the ground 2 turns of preload we put a additional 4 turns in it and made some practice laps it reduced travel down to around 4 inches and car starter to move a little but...
-
so what would you recomend going to stiffer spring could that be the reason the rear has no action
-
the lr feels like its not coming up on bars the lift bar spring is a 325 and it showed about 6 inches of travel on 5th coil is that to much travel
-
Will have to check on exact positions on shock settings they came straight from Keith burner at accufforce and bolted on car he had them preset for basic setup with the 500 on the car in burried the...
-
On j bar it's 8 3/4 on frame And all the way the way on the bottom on pinion plate side to side is 16 5/8 I gotta be missing somthin what's thoughst on a heavy lift bar spring? To help lift car like...
-
On j bar it's 8 3/4 on frame And all the way the way on the bottom on pinion plate side to side is 16 5/8 I gotta be missing somthin what's thoughst on a heavy lift bar spring? To help lift car like...
-
Ohlins they all moved freely
-
Car had 53.9 left 53.5 rear shocks are fresh from accufforce ohlins 1st night on them lr chain set at 13 inche's had 500 on lf 350 on rf 200 lr 225 rr 325 lift bar spring car overall weight is 2495...
-
It's in the bottom hole on mid plate to get it as high as possible
-
Went with there recommend springs no movement in car stayed flat and rf bottomed out put 600 in lf and 500 in rf no movement still rf shock about 3/4 inch from bump travel wise any ideas? Car has...
-
We have a new genx was curious on what springs to try because we will be running a 510 pound steel ford engine the overall weight of the car is 2500 pounds with a 220 pound driver, we ran the same...
-
Bert ball spline trans with Bert bell and starter no cracks or welds...$1350
Bert bell and starter $400 call or txt 740-294-7525
-
Ball spline trans and bert bell no cracks and starter $1350
Bell and starter $400 call or txt 740-294-7525
All times are GMT -5. The time now is 05:51 PM.