Search:
Type: Posts; User: 57m
Search:
Search took 0.46 seconds.
-
The right rear would get more weight
-
Hi the question is would dropping the lr rear spring rate from a 250 to a 225 would this help tighten up the car to drive straighter in the dry slick and if not what adjustments would you recomend to...
-
Hi we had the exact problem when we ran a limited late model with a hei ingnition idle it sounded great under load it would pop an bang we ran 360 13.1 compression with steel heads we tryed...
-
Sorry i have not been on here for a couple days. but yes this setup really put us in the right direction thanks for all the help. :-)
-
yes this helps i appreciate the advise and will put it to good use thanks for the help.
-
would it work better to have a 200 lr and 225 would that also promote more drive and how would that change entry.
-
Regarding wheel weights lf 510 rf 513 648 lr rr544 rear percent 53% left side weight 53% and has 108 lbs of bite, we can go down on bird cage side.
-
Hi to answer some of the question first i will start with the springs 525 lf 350 rf 250 lr 200 rr. The four link suspension is left upper 3 dwn. left lower 2 up and the right side upper is 5 dwn. ...
-
the question is how much split can you run between the front springs we currently run a 525 on the left and a 350 on the right. we run a 08 masterbuilt and we are trying to get more side bite out of...
-
hi just got a quick question when scaling a car for setting the overall bite say you want 90 lbs of bite should the driver be in the car for the 90 lbs or should that be just as it sits.
-
Iwas wondering how much lead there should be on a 2008 masterbuilt we are at 1 1/2 right now thanks
-
we checked the tire temps and they were 100 on the lf rear and 130 on the right rear what would be the best way to even them out thanks.
-
hi got a question maybe someone could explain would we could do. we'll last night we ran and the car needed more side bite or something good to the middle but coming off not so good. we have a 2008...
-
thanks we'll give it a try.
-
its kind of free coming in, rotating is good but from the middle off it just doesn't hook up
-
Does anyone know what the length of the jbar right know its roughly 22 inches thanks
-
we have tried to take out stager we start the feature with 32 gal of fuel. the issue is when on throttle
-
i was thinking about it and does anyone know how long the j bar is suppose to be in length for a 2008 masterbuilt we run 1/3 mile semi banked track.
-
to respond to your question. track condition we are talking about is feature time the track starts to get black and shinny with a little bit of cushion. with the car it turns in free just fine it's...
-
it would be forward bite a little more side bite would not be bad thanks
-
hi we have a 2008 masterbuilt chassis we have for spring in it 550lf 450rf 250lr225rr we run a pop up shock in front of the rear end with about 200lb in it . my question is we have tried to tighten...
All times are GMT -5. The time now is 07:24 AM.