Search:

The front leaf brackets have 3" adjustable holes. Can also use the spacers at the axle to leaf mounts. Wouldn't recommend the aluminum ones. I never ran the one in the photo. I had to take it out for...

Here is a link to my fastboys build. http://s629.photobucket.com/user/outlawstreet21/library/

We have had great success. Won 28 out of 36 features. I have run it floated and locked. Car is forsale if anyone is interested.

I used a set of Ford Thunderbird Turbo front rotors. Bought a set of metric weld-on brackets and metric calipers. You will need to trim out the brackets where they weld to the axle just a little....

Always ran the front 2 inches wider than the rear. With my current Camaro on a fastboys setup I run 3" all the way around.

This is my 82 Camaro.

http://www.4m.net/attachment.php?attachmentid=46231&stc=1&d=1375568976

Check out Total Custom Carbs from Louisiana. I know Keith white and a lot of Imca guys use them.

Ok, pulled the hood to check over things before the race and the upper and lower hose was swelled to about 4" in diameter. First thought was blown head gasket. Opened radiator cap, spewed water and...

I don't know how much the difference is between a escort and a thunderbird rotor is but I used a metric bracket and caliper and it works great. I just trimmed a little off the bottom of the bracket...

I have mine around 37 right now.

You will need to trail the right rear 1". Have at least 4" of stagger and a low cross percentage or it will push like a dump truck on the gas.

I found one locally a couple weeks ago. Thanks for the reply.

I did a 7.5 rear disk brake conversion last year. Used thunderbird rotors, put longer studs in, and used metric calipers with weld on mounts. Works great and did not change anything else.

Do you open the gap?

What spark plugs do you use in a oval port, open chamber head? (brand and # )

You can mount it from the engine block with two 1" straps welded together. I will get a picture of it this weekend.

Looking for a D4 Intake to buy. Must be stock with no porting. Let me know what you have. Thanks

Hoosier Dirt Bozz medium on 8" rims

So I go to this race every year and the track slicks off. You would think that it is laying rubber down but it is black slick and drives almost like driving on ice. I see all the cars are having the...

Looks as it will be cheaper to get a 8.8. That way, I can use a 3.55. Found one at the junkyard for $100.00.

Southwest speed carries the right rear floater for $ 88.00.

Post from another thread.

FASTBOYS leaf tech(get it here)
Let's try this one more time
I am not too good at this typing and spelling thing, but I think you can get what you need to know about...

Had this exact same issue a month or so ago. Had to switch from an MSD box to a TFI and every time I would pull the trigger on the timing light it would go to missing. I could run the timing light...

Will it work? Yes. I have run this setup for the past three years. If you are on a tacky hooked up track I would lock the floater anyways on a camaro. Now if your running on a dry slick track and...

OK, where can I get something aftermarket for a 7.5?