Search:

Matt 49is correct! Just found my Ohlins canister is very close to rubbing the hyperco 16" barrel. It is a piggyback.

Thanks for all the replies!
Seems like it runs the best @7000.

I know a lot of the successful 2bll/LLM winners around here turn 8000-8100rpm!
I'll assume they have small CI screamer type combo's.
Thought maybe since most use AR 56 rear tires they cut back on...

400ci, 4412 carb, dyno = 510 TQ @ 3500-4000 rpm, 499 HP.
Engine falls off @6300rpm.
LLM rear tires must punch 50!
Is this a desirable Tq/hp range?
I'm worried the tons of TQ down low may light...

Need headers for 400ci sbc 4412 carb. There isn't any rules on choice. Dirt late model 1/4 mi. $400. Budget. 1-5/8-1-7/8 or triple step etc? Engine made 510HP on dyno with junk headers. Will this be...

Anyone have info or feedback on 2011 Shaw late model? Wanting to run all steel 2/barrel local track class! Safe cage, turn in, bite off, seem to have low resale. Don't see many in the southeast.

How bout $4000.?

Less than 40 nites! Complete roller 9" 650 gear w/ extra 583/620 r/p bare casings just need spool to put 2gether. 4 wheels seat rad gauges belts lines headers driveshaft! Always hear jus add eng Bert...

Eng. builder suggested Baker or Rapture,TY for the replies! Really like to try Brasswell.

We are looking to purchase new carb.400 sbc ump mod mtr approx 650 hp! Baker,Willys,Blp,AED,appear quite often As suggestions from others. Currently have a red and silver carb (no bashing)and not to...

Need starting bar angles for a 4/4 ump mod,lr behind/w limiter 20'' jbar. LRU 14'',LRL 12''/w5'' plug,RRU 14'',RRL12''/w5''plug.Track can be ruff tacky or semi dry ruff,1/4 mile. Please try to...

6.5-7.0 on methanol at WOT will not supply enough fuel to the engine,possible damage could occur.

This goes against most rates I've read about, but I'm gonna try a 750rf 850 lf! Does seem like no matter what rf spring rate we have shock travel stays the same!

What geometry settings would you suggest to combat this rjj?

mine is a ump mod. Cavemod? I'm beginning to think one could achieve a balance two ways here. One stiff fronts, high j/bar. Two light fronts low j/bar. We did'nt get a chance to try the 1125 rf/1075...

Suspension spring specialist! 5.5/8.0-500#- 1500#. Day motorsports among other have/em $45. Is a common price.

Yep the paint on my frame is rubbed off from contact with the rf tierod. I dont know how much contact it'll take to cause trouble,but the evidence is there. Yes 8'' springs can be purchased thru...

Yep all you just said! Sounds like a Rhulman conversion might be in order this winter.

Agree too much split! Logic is based on motion ratios of chevelle,nova,metric lca's .

Ain't saying it won't work just don't seem logical! Have read Mr Adams post along with the motion ratio post's. I think lighting chassis used metric for years and he suggested a min of 1050rf. Mine's...

Verified the ride hts were over 8" from ground to lca bolts! To late in week to get new springs. Left the 1050 rf found 70 duro full spring rubber to go on lf. 850. Thanks for all replies,have a lot...

Swap ones I have 1050lf 850 rf or how much split ya talking?

Both rf lf 8"?

Measure from top of lower c/a to the bottom of spring bucket on frame. 3.5" rf 3.0" lf. Unsure of balljoint as they came in car,haven't verified exactly what heights. RoushYates springs checked and...

Thanks for the replies but it already bottoms out a 1050 now. I understand nova lowers are different. Was hoping someone who ran true all metric could shed some light on this application. Yeah I hear...