|
|
Search:
Type: Posts; User: prostock814
Search:
Search took 0.38 seconds.
-
Pm sent fast_crew. Thanks
-
http://www.keysermanufacturing.com/site/?callHandle=category&d=1506&dt=94
-
-
I had the same problem. Racer96 has the answer. I purchased a sweet steering box with .185 valving and it's amazing the difference. Then I purchased a box all-star sells for around 220$ with the same...
-
I was trying to stay away from the adapter bracket. What spindles have the same caliper bolt pattern as the camaro?
-
I'm looking for a brake caliper with a small bore diameter that will fit camaro spindles. Currently I have 2.8" bore calipers. Is there a stock caliper that will get me closer to a metric piston bore...
-
What size master cylinder does the camaro brake caliper need to work properly? What size master for a metric caliper ?
-
I had the same problem once. Turns out the clutch disk was backwards. I was using all ram components. We run 3 shims as well.
-
What is everyone running in their Ford 9" a full spool or the Detroit circle track locker?
-
Is there a stock steering gear box for a metric chassis that will work with 2-1 steering quickner. Looking for something with .185 valving or lighter.
-
I'm running a metric chassis 80's style 3400lbs. How much air pressure should I run in the rf so it don't roll of the bead. Track changed rules this year with only rr beadlock allowed. 8" American...
-
Anyone personally try one of these? Interested in how it worked for you?
-
I have a 85 Monte Carlo. Stock mounts. Ford 9 rear. 3400 lb. Track is about 12 degree banking 1/4 mile. Car is hobby stock. Stock upper contol arms .
-
What is the best angles for a mid 80s metric chassis in stock location rear trailing arms? Ford 9" rear.
-
what are you doing to get more drive off the corner when the track slicks off.
-
Looking for ford 9" gears in the 4.30s range
-
looking for ford 9" gears 7.16 or 7.33.
-
How much preload should i have on my 85 metric chassis with stock 4 bar rear suspension. Im using 12" pigtail on one end springs and spacers. Right now i have it about an inch of the spring is still...
-
im at 900lf 1000rf 250lr 175rr. should i soften the rf along with the lf to keep it at a 100lb split? what combination would you recommend? im 52.7 left 53 rear 54.4 cross 300 lbs bite
-
Ok guys im confused. Im already tight going in. How can you loosen up going in without affecting middle off?
-
I have always ran a heavy rf spring. Im going to try running a heavy lf spring. what is the logic behind the heavier lf than rf. What rates should i start at with a 3300lb car?
-
Stock car driver, I have a 3300 metric chassis that im building. where would be a good place to start with the setup. spring rates, rear percentage, left percentage, shocks, ect. Im new to a metric...
All times are GMT -5. The time now is 02:04 PM.
|
|