Search:

What advice can you offer as far as getting better with the technical setup side of racing. Due to my job I am not able to get as many laps and test as much as I would like. So weeks I don't get to...

I believe it is the exact same spindle.

Start with the basics. Assuming you're not spinning the tires. No fuel pump issues? Carb matched to the motor and tuned right? Is your car heavier. If all of those are good look at gearing. Your...

Can you recommend a user friendly roll center program?

I ended up going with the afco ones with the cups on top. Just trimmed the cups down to fit. The center of the spacer is only 3 inches though. Going to have to remember align the shock hole. I don't...

Also do you run 9.5 inch springs with them?

Does anyone have a part number for hidden spring adjuster weight jacks for the front end of a metric car. Need one that has enough clearance for stock mount shocks. All of the ones I've found so far...

How big much of a difference does the extra unsprung weight of a beadlock make. Never ran a beadlock on the left but I'm thinking of trying it just for the convenience.

In search of a metric pure stock with 9" floater rear end. Either turn key or roller. Needs to be within a reasonable distance from the Indianapolis area. Text info to 812-603-1858

Can email or text pictures. Car is fast and most importantly consistent.

Race ready 2009 Mastersbilt previous ran with Indiana Late Model Series. 604 crate engine built and blueprinted by Travis Kerns. Sealed. Bert ball spline transmission. Holly 750 Carb. Ohlins canister...

Race ready 2009 Mastersbilt previous ran with Indiana Late Model Series. 604 crate engine built and blueprinted by Travis Kerns. Sealed. Bert ball spline transmission. Holly 750 Carb. Ohlins canister...

2009 Mastersbilt smack down with gen-x updates. Square tube with four bar. Only one full year on the car. Only 3 nights on the car this year. Ohlin double adjustable canister shocks. Winters rear...

2009 Mastersbilt smack down with gen-x updates. Square tube with four bar. Only one full year on the car. Only 3 nights on the car this year. Ohlin double adjustable canister shocks. Winters rear...

check your pm's

Great motor that will last. Call randy at 317 440 6441 or text Tory at 812 603 1858

What kind of shocks does every one run with ump pro lates? Are they actually following the approved ump decal shocks rule. A couple of people have told me they did away with that but their site...

zero laps since refresh. 406 orginally built by Niebel. Stainless steel crowler rocker arms. Stud gerdle. Air flow research aluminum heads. scat crank. Ross Pistons. H Beam rods. Splade niebel main...

back to the top

back to the top

I don't usually give a lot of advice because I'm no expert but seems like you need more rear stagger. 4-5 inches. What you could be seeing is that the car is actually so tight he's having to put...

zero laps since refresh. 406 orginally built by Niebel. Stainless steel crowler rocker arms. Stud gerdle. Air flow research aluminum heads. scat crank. Ross Pistons. H Beam rods. Splade niebel main...

zero laps since refresh. 406 orginally built by Niebel. Stainless steel crowler rocker arms. Stud gerdle. Air flow research aluminum heads. scat crank. Ross Pistons. H Beam rods. Splade niebel main...

zero laps since refresh. 406 orginally built by Niebel. Stainless steel crowler rocker arms. Stud gerdle. Air flow research aluminum heads. scat crank. Ross Pistons. H Beam rods. Splade niebel main...

First of all I hope by "wings" you mean the Frank Kimmel street stock series style wings to slow the cars down. IF you mean "run what ya brung" wings on a mile... wow. Also place a rule on gearing...