|
|
Search:
Type: Posts; User: Dirtss70
Search:
Search took 0.31 seconds.
-
I bought one today. I will try it when I get the ball joint changed. Thanks
-
Wanting to know what lower control arm is best to use on a fox body mustang on the passenger side. I understand the '87-'88 thunderbird or couger is 3/4" longer. We run 1/4 mile asphalt with 2300...
-
My mustang clutch disc is 8.5 in. diameter and the escort disc is 7 7/8 in diameter. Will the larger mustang disc and pressure bolt up and work?
-
If I used the escort flywheel with my T5 what TOB ,pressure plate and clutch disc should I use?
-
I'm looking for a set of padded followers for a 2300 Ford. Anyone got any?
-
I would try the 3.08 rear gear with your tranny in the car first. If that's still too much gear then go with the 2.14 trans and 3.27 rear gear.
-
Have you thought about using a T5. The 4cyl models come with 2.14, 2.34 or 2.37 2nd gear ratios. The V8 transmissions have 1.93, 1.94 and 1.99 2nd gear ratios. The input shaft has to be turned down...
-
How often do the valve springs need to be replaced? Our car is raced every week on a 1/4 mile paved oval. It is a 2300 mustang fox body with an Esslinger hyd cam. The motor turns 7200 rpms.
-
Thompson Machine in Plant City. 813-754-6338
-
Thanks, we can't run anything adjustable on the strut.
-
What are the best struts to use on a stock mini mustang racing on 1/4 mile paved? The car is 2300 lbs with 5 in ride height on front.
-
I don't race on dirt any more but I think the 214 trans and 327 rear would be a good combination to start off with.
-
-
I bought a 2300 and this is a picture of the numbers on the back of the cam. Anyone have any idea what cam it is and who makes it?
-
Try 25 to 28 psi in right side tires.
-
Has anyone tried the Esslinger 2270 cam with hyd lifters on a 1/4 mile paved track? Car is a '89 mustang with 2300, 500cfm holley, stock oval port head and oval port intake. Rules state it must be...
-
I've heard '89 and up the lower right a-arm is longer. I don't know for sure but maybe someone on here can answer if it's true.
-
Go down to the 22 team and talk to Wayne and Shirlene Hammond. Their car always seem to have the fastest set ups.
-
Anyone ever try running a V8 T5 tranny? Did you have the imput shaft turned down to 4cyl specs or did you run a custom pilot bushing? Just wondering because the V8 trans had alot more second gear...
-
Still looking for a good tranny!
-
Want to buy a 4-speed tranny with shifter for a fox body mustang with a 2.3. Located in central Fl. My e-mail is DCAC9591@aol.com thanks, Cam Canova
-
I found a new one on Ebay
-
None in the local boneyard. I can't seem to find one on the net. Anyone know of an oline store that sells one for an '81 fourspeed?
-
Looking for a 4-speed and bellhousing for a 2.3 Ford.
-
Where can I buy a new slip yoke for my Mustang 4-speed? The tranny is a 2.14 second with a 25 spline output shaft.
All times are GMT -5. The time now is 06:43 PM.
|
|