|
|
Search:
Type: Posts; User: texas pride
Search:
Search took 0.30 seconds.
-
I've heard and seen the tool before but never used one. what area of the tire do you use it on and do go from side to side or go around the tire when using the needler
-
I was running a jbar 19 1/2 long. tires are American racers k704. never ran the straight bar before but ive seen a lot of ppl running them so ive been curious of the plus and minuses.
-
what would happen if I went to a straight instead of a jbar and do I need to be higher or low on the frame side ?
-
we are switching from a 9'' to a quickchange. my is question how much will the setup change. will my j bar be in same location. car is 4/4 dw11 on a pullbar. also whats a better option a j bar or...
-
I have a dw11 that I have ran a few times this year and I was recently going through the front end and found my ball joints were different lengths. so im wondering if this what others are running or...
-
I'm running a open motor about 575-600 HP with american racer tires
-
I'm thinking about trying a quickcar 3 biscuit bar. This a dw11 4 link. My question is what is the best biscuit combo to run for slick track. Should I stick with the red ones or mix it up with some...
-
needing some slick track shock help for 06 dw with 12 updates car setup on 4 bar with stage 2 afco pullbar.racing mostly on 3/8 high banked track. any setup help would be helpful i have no seat in...
-
will metric impala lowers fit a metric chassis and are they longer than metric lowers
-
can you email me a pic of the afco pullbars you have.cbisaac2011@gmail.com
-
shaw will sell you some of there brackets for 20 dollars a piece.
-
they run at lonestar speedway and boothill speedway
-
my father in law has a 09 shaw car 4 bar both sides that has a coilover on the right side in front on rearend. so the question he has is would it be better to run the shock and spring seperate with...
-
Yea that's what I was thinking in reguard to the tie rod my chassis builder notch out the frame in front on both sides I figure they were making clearance for the tie rod
-
Well my car hasn't hit the track yet this season I'm hoping to test in two weeks and I'm some what new to mods.and I've been worrying that that stifff of a spring mit not let the car roll good.plus...
-
Where can I get the bushings ? Does speedway sale them
-
ok i have a 4 bar modified with a metric clip and i have metric lowers but i dont like having to run stiff springs so im thinking about going to nova lowers but i think i heard somthing about having...
-
im looking for info on how to get in contact with max eddie thomas from the dallas area races tracks.i think have one of his chassis so im tryn to find some info on it. thanks for the help
-
do you still have a afco pull bars and if so can you email me some pics. cbisaac2011@gmail.com
-
wondering if anyone has used or have any opinons on Qa1 26 series shocks the nickel plated ones. Looking at buying some of them so im looking at some feedback on the good or bad? THanks for your...
-
i have a metric modified that is a 4 bar car with nova lowers with a 700 and 750 on the front,j bar ,16 inch rear springs 225LR RR200 on sliders and its not a big name chassis brand so i dnt have...
-
where did u purchase them at?
-
-
is it a complete rear end and where are you located
-
how much are you asking for the transmissions and where are you located
All times are GMT -5. The time now is 09:48 AM.
|
|