|
|
Search:
Type: Posts; User: hobby28
Search:
Search took 1.12 seconds.
-
I have a 1997 Harris Chassis that I have been struggling with all year. I can't get the car to roll to the RR, it will roll to the RF and hike the LR, but the LF stays flat and no forward drive off....
-
I bought an older Harris modified chassis and it came with the old style side Exit headers. How much power gain will I be looking at by replacing them. Pretty standard SBC 9:1 compression.
-
Thanks for the replies. I have widened the oil band on the lifters, I have suspected a lack of oil all along.
-
Has anyone tried using the Elgin roller tip rocker arms? I have been running the Comp Cams Magnum roller tip rockers but have had trouble with the pivot ball area turning blue. The Elgin rockers...
-
Sorry I'm not having any luck with the photo.
-
The geometry doesn't look right to me.
-
I bought a 1998 Harris B-mod and I'm not sure which spindle I'm supposed to have or what is currently on the car. I have casting numbers 369055 369056. I'm trying to make sure the geometry is close...
-
Update - So I took some of your advice. This week I ran LF 550 RF 600 LR 175 16" RR 175 13" with 15 degrees in the LR bar and RR flat. I finished 3rd out of 24 cars and close enough to the leader...
-
I also need to add, I am racing on a high banked 1/2 mile track, high momentum. LR bar at 15 degrees RR bar level.
-
Does the J bar have anything to do with the LR lifting? My J bar was angled down toward the chassis.
-
2 link with a J-bar sliders on both sides. USRA B-MOD
-
I have raced hobby stocks for several years and now getting the opportunity to drive a DW8 B-mod. The car handles pretty decent I finished 8th out 24 cars in my first race. My question is how do...
-
I am running Howard's drop in Racing spring 98213
-
I am running EQ heads with stock diameter 1.250 valve springs. I had bronze guides installed and now the spring damper is rubbing on what was left of the cast guide. The machine shop left that...
-
Upon further inspection, the rear lower a-arm mount had been damaged in the past. So I straightened it and things look much better now.
-
IMCA metric hobby stock is rubbing the frame during counter steer. I removed some caster trying to gain more clearance but it still hits pretty bad. Good bushings aftermarket upper a-arm nothing...
-
I am looking for tips on reducing drag on front brake calipers. I am running 78-87 metric stock type calipers and I have a normal amount of drag, I am just wondering if there is a way to free them...
-
What weight oil does everyone run? I have had trouble with the rocker arms turning blue at the pivot balls. I have been running Schaefer 10-30 synthetic should I switch back to a 20/50?
-
I have read numerous posts about oil, and I am even more confused now. I run imca hobby stock SBC solid flat tappet can with stock type rocker arms. I have been running Schaeffer 9000 full...
-
I purchased a used 602 crate for my hobby stock. Does everyone run the mechanical advanced lockout on the distributor?
-
Could this be my cause of cam lobe problems?
-
Have you been able to solve your problem? I have a set of EQs also and have lost the lobe off two camshafts, same lobe each time. I can see where my pushrods have been rubbing on the head below the...
-
I have been using a stock driveshaft so the balance should be close.
-
This is what I am dealing with.
-
I am not breaking the gear but I am breaking the trans Case like that and snapping driveshaft in the middle. I found the upper bushings were bad in the rear end today.
All times are GMT -5. The time now is 01:05 PM.
|
|