Search:

Josh's biggest problem is he shows up at the track with his helmet bag. It's the same problem all the Bowyer drivers have had. Don O'Neal was probably about the best non working driver that's ever...

I tend to agree that terbo rarely if ever thinks he was in the wrong but the majority of drivers are like that kinda goes with the territory. I'm sure his opinion of the situation changed after he...

Shouldn't need one some times it helps to do a single pedal pump/ stroke per bleed cycle instead of pumping the pedal multiple times. I have also heard of guys removing the line and using a #2 pencil...

Yes you can run all xr-1 front suspension on a B/g or a orange car. It doesent make them a xr but it does help with the new front end settings and increased travel but without the updated crossmember...

It was probably letting more in than out

I think generally speaking if a head has the same flow number at higher lifts but more at lower it is a sign of a overall more efficient port and that should equate to more power and more power longer

We've always run the same plug with gas or alcohol so......

Warrior racer. Thanks for commenting. If you don't mind would you share exactly what and how it was found to be deemed "illegal"

The rules say .020" so i would say anything more than that would be blatant cheating

Not knocking anything Paige has done but just because it's a good crate car doesent mean it can compete with an open motor in it. Most guys in crates get caught up chasing the newer setups and their...

So curiosity was killing the cat here. So i looked it up the valves are allowed to be shimmed a maximum of .020" to get seat pressure back after valve seat machining during a rebuild the seat...

While i agree with your statement im not suggesting sombody read the mic wrong I'm suggesting that the desired install height created to much seat pressure deaming him illegal. I did not watch the...

If you've ever been to any of the big passing crate races and hung around after. You would know the top three engines usually get tore completely down and every measurement checked and if it doesent...

I'm not sure i know what your referencing. If it's people describing Volusia as being like eastbay. It has nothing to do with setup. Not saying their aren't things that couldn't help but their is...

They took some out of the right side last night 😉

I like aggressive drivers like both of them but thought it was overly aggressive for both of them so early in the race. Rtj slid to the moon out of four you know the sliders coming he had to be able...

I don't have any first hand experience with 525's but in my opinion try-y headers are a very good investment. They really help on restarts and in the center on initial fuel pickup. Beyea headers are...

Unless your doing it to help get the front ride height up to get the rear deck lower to pass tech i just don't see much if any advantage their especially for the tuning inconsistencies that will come...

It's just too install the wrap. Very common practice

I agree theirs not a lot of normal travel range to play with witch would make tuning a very fine line.

Decreasing droop load takes dynamic wedge out of the car. Without getting into all the fundamentals of weight transfer and the resulting spring loads. We can just say in general more wedge makes you...

It is a relatively small investment. Most tracks allow 3-5 cars so you team up now that 1000$ is $200-$335. Also the 15 position is flawed logic. The improvements can easily take a guy that could...

Agreed but the average guy doesn't need feature conditions to get better he just needs a track that's not junk and stays consistent so that he can make a change and identify the difference aswell as...

Yep because cj will tell you himself every car with a spindle and two control arms is basically just a copy of his front suspension. 😉

I definitely agree