Search:

why do people jack up the rear of car at the track and do you put the cars on jackstands at home or just let them sit on ground

slider was topping out thanks now it will roll when i jack it up untill it hits the tube that should help my problem in the other post right?

the birdcage is welded to the housing with a slider on it even with the bird cage welded it should hit before it comes off the ground right

when i jack the car up in front of the lr the chassis comes up maybe a 1 1/2 and then the lr comes off the ground shouldnt the lr axle tube hit the underslug bar when i jack it up before it comes off...

i have a usra b mod that has good drive off but just a little tight getting in and center and does not really roll over on the right side it has a j bar even with pinion and 5 3\4 rake what would...

how much air in the right front is safe with a non beadlock ar tires

yes it is usra b mod 3 link

i have a b mod with birdcages welded solid to rearend and ran lr in front and rr behind and was wondering if running both springs in front would help with drive off we are going from a solid bar to a...

our rules are going from a solid pullbar to a spring or bisquit pullbar and was wondering about the movement of the drive shaft was wondering how much do you have sticking in the tail shaft and how...

i have an 01 and if its an older one there is no tech help i get just as many answers when i ask my hose dog

where do i want to mount the spring as far as side to side. inside the framerail or outside of the framrail does it need to be closer to thr rr tire or closer to the pinion

got it thanks

so it makes it loose on the gas and tight off with a spring pull bar if mounted behind on rr sorry dont understand what loading or unloading means

what does moving the spring on top from behind do is it worth the time and money if you dont have the mounts on the car

if i put a spring mount on top of housing on the rr do i want it welded so its strait up sitting still or do i want to sit it about 7 or 8% forward like the pinion so when the housing rolls back...

what gauge aluminum is to light

how does everyone build the slope in the roofs on a modified

if you go to a springbar from a solid pullbar do you run the same angle in it and do i need to change springs and shocks

what would be better to run a spring or biscut with sliders

what is the rule on the pullbar does it have to be solid or a spring i can not find it in the rules

can someone pm me

why do some cars have a slider on lr and spring on top on rr

my track is going to usra b mod rules next year the rules say one pull bar with shock located at top of rear-end. does this mean a pullbar with a spring like the a mods run because the b mods around...

what about a hei sport mod motor champion v59c plugs

ok thank you