|
|
Search:
Type: Posts; User: badfast47
Search:
Search took 0.12 seconds.
-
If you don't cheat you can't win. Thank you an
d good nite
-
Moved the battery from left side to right side. Then took some out of the lr at the coil over. Got it down to 104 lbs lr bite. Going to start from there. Thanks for the input
-
I have seen LR Bite weights all over the place For modifieds , Late Models etc. I have seen it as little 80 lbs. to as much as 200 lbs+. Just want some feed back as how much weight you have tried and...
-
Last sentance was what i was looking for. Might be able to drop as much as 8lbs. on the RF and 4 to 5 lbs. every where else. Thanks for the help.
-
Now if it is good to have lighter wheel how much weight is needed to be dropped say from a standard 31lb. Beadlock wheel for example, to make a difference ?
-
( Some rules require stickered wheels, or minimum weight rule for wheels.) Not a prolem where i run.
-
Having these on the car help ? Thanks.
-
-
I stand by my original answer that they're too big. You've been on here for over two years asking for thoughts on heads that 99% of the people who have answered you keep saying too big. Suggest you...
-
This is a new build and have never have used these heads b4. So that's why i'm looking for info
-
Looking to turn 7500 to 8000.
-
-
What do i need to use it on ? A 434 ?
-
Will they make power on a SBC 406
-
Thanks for all the help. Just got out of the garage and was looking things over with the car i have. Don't like the spring on top set up that was put in this car, long story but...Have been doing a...
-
To be a z link, anything goes, just like a 4 link.
You will need to lengthen the bottom bar...
-
Will be changing to a z link on the rr to see how it will do. From what little i have read the bars need to be the same Lenght ?? Right now the bars on the right side are 17 3/4 inch (hole to hole)...
-
Tighter on exit would be good was hoping it would help mid turn with rr tied down. But all i can do is try it. THX
-
Have both sides floated on a 4/4. Want to try leveling out both right side bars. Spring is on top on the RR, shock behind. LR spring in front, shock in the rear. What kind of effect will this have ?
-
I also have a set of aluminum dart pro 1's 245 cc heads with 2.100 intake valves. Would like to put them to use.
-
-
A lot of time has passed and want to beef this motor up. Raced the current motor specs right at 7,200 rpm's. I want to bore it to a .60 over with dome pistons at approx 12:1 compression and Assault...
-
I ran across a 509 block a guy want's to sell and says it's a standard bore. The numbers on the block are 3951509 and 2 freeze plugs. Sound like a good place to start for a 377 with the right machine...
-
i have a Holley HP main body 750 Carb 134-300c. It came with 72/84 jets. I installed a rear metering block with no power valve. I want to use it on a 383 aluminum head modified motor. Flat top...
-
Didn't do much but make things worse. Back to the original set up
All times are GMT -5. The time now is 10:48 AM.
|
|