Search:

Any advice on rebuilding a original ball spline section? It doesn’t even have the greaseable seal.

https://racingnews.co/2018/08/22/2018-dirt-million-driver-reward-points-final/

Here’s the story behind what Mott pulled off. No sponsors, did it all himself. Made the most out of what he had to...

‘16 Rocket

Has anyone tried Keyser's spring steel nose supports? After a rough track this past week i'm in need of new supports and was thinking about giving them a try and see if they hold better than the...

Try taking the heavy cage off. I had a similar problem. Car was bad fast when track had any kind of moisture in it and then when it went slick you’d drop ancor. Took the heavy cage off and left...

Thanks for the help everyone! It is much appreciated! Thank You!

That 3" number was actually the 4" number my mistake.

I made some changes and went through the car and found somethings. Will...

2016 Blue Gray Rocket. Standard set up.

It's flat all the time in the slick. Gets up when theres ANY kinda moisture in the track.

I get the body roll, major gains ect but if the 5th coil...

well I tried a 225 with a bump that hit at 2.6" of travel and had it at 36.5". Needless to say car was slow and still wheel spinning.



Engine is a 415 @ 800hp. Fuel is 114 HCR+. Tires are LM...

Seeing what people have had success with. I'm fighting a drive off issue in the slick where i blow the rear tires off coming off the corner and then the they finally hook about the flag stand. Car is...

What kind of lift bar is everyone running on their Blue/Gray Rocket? My car came with a short bar on it (33" 5th max). I need something that can get the 5th out to the 36-38" area. I looked at Wehr's...

Its been a few year but I believe I ran a 450 LF 400 RF and 225's across the back. Problem is you'll never be able to run a set up like we do today bc your RF rail will always be in the dirt....

Can someone explain to me why I would want to needle my tires? You always hear people talk about grooving and sipping their tires but never anything about needling?

Mainly concerned with working...

Assuming black front car....put the spindles on. Gets you 1/2" higher, better than nothing though that's still not enough. Do not run the bigger tires. It will makes steering lag.

I had a orange car that had blue front end on it. You can use the blue upper and lower control arms with your orange spindles. Left side is the same will be the same, right side needs a 1/2" taller...

So does anyone want to help me out with At what point do you consider a tire junk (UMP LM tires mainly)? I'm not buy new tires every night guy. Is there a way to go off of durometer or Thread depth...

Got a couple of questions. I'm debating buying a tire prep machine. I'm pretty much by myself so tire prep after work can pretty much take up all my time Monday-Wednesday and then put the car, tools,...

Has anyone on here run Rocket's stacked LR deal? They say to run (2) 175's and no lock out nut. But if you have a spring smasher you can run a lock out nut and set the load to 200lbs at 24.5" of...

I'm currently registered for the Gateway Dirt Nationals in St. Louis next month. If you missed out of registering your in luck as I am selling my registration and parking spot. If interested please...

I was going to run the same set up you described but I was told by my chassis guy to remove the aluminum i had placed across the radiator bracket (which I put there to help seal the radiator and keep...

updated sold items

Sold!!!!!!!!

updated and removed sold items.

Added 6" SCAT Rods with ARP2000 bolts

Crank, rods, and pistons were all used and balanced together so no need to pay to rebalance!!!!

Misc. parts off of old car that need new homes to make room for the new chassis I have coming. All of the stuff is in great shape just didn't transfer over to the new car. If interested make an...

Misc items need new homes to make room for the new motor I have coming. These need to go so if interested make an offer! For pictures or questions please text me 330 904 7204.

1) Beyea Tri Y...