Search:

4" narrower. we run one still as a truck with a v8 against cars here in Oklahoma. very fast. and yes everything on the front is same as metric car except the center link.

One of the most fun races around. the pit crew challenge/ qualifying procedure involves the whole team in this one. Southern and Northern sport mods. IMCA rules strictly enforced.
see details at...

This is one of the most fun races around. with the pit crew challenge/ qualifying it brings the whole team in on the race. Both Southern and Northern sport mods ok. IMCA rules strictly enforced. go...

211 views and one response.is this stuff top secret or what?thanks for the one reply

new to the strut mustang.what do you suggest for caster and camber settings?

on our 8" rearend i used t bird turbo coupe rear rotors,weld on (street stock type)brackets which i shortened aprox 1/2" and gm metric calipers and pads.made a nice inexpensive setup.

how much on the cam gear and pulleys ? any pics ?
clift@pldi.net

day motorsports has em

Rt3 must be racing at 81 speedway.
i have a stock flywheel thats heavy.i'm just across the line in Oklahoma.
you can call me at 602-684-0532

anti pull over squirters from holley.they are hard to find listed anywhere but are made,call holley and get the part number.we use them on the mini stock and on the v8s in the southern sport mods.

sent ya some pics

sorry kelracing33, i havn't been on here for a few days.i'll try to get some pics tonight and send you're way.

i mounted ours on a 1 1/2" peice of angle iron mounted to the 2 holes on the left front side of the block,then used a chevy aluminum block mount between the pump and the angle. be sure to lign up...

i was saying if they let you run the v-6,out here the mini stocks are rear wheel drive 4 cylinder cars with rules of 4cyl and 1-2bbl carb about anything else is legal.then we have front wheel drive...

Those SHO taurus are fast around here on the 1/4-3/8 tracks

mitsubishi eclipse,eagle talon,ford probe and ford taurus are what works around here, especially if you're not limited to 4 cylinder,the turbo v 6 cars are fast

Thanks for reassuring everyone that my above comments were true.
BTW out here in Oklahoma we don't play those California gay butt games

mine is 47" from center of u joint to center of u joint.i'm not sure how long th 79=89 are, i know the 76 is shorter wheelbase.we just built a 95 mustang and i set the motor back far enough to use...

I agree totally,see my reply to boport on the 95 mustang front hub post.then afterwards he just reassures everyone that my comments are true.just look at his profile it explains it all.bad thing is...

Hey boport, I did look at bearing numbers,there is no wheel bearings listed for the 95 only the hub assembly.
also i am smart enough to know from reading post on this forum for a while now that you...

this may be a dumb question to some,but i built a 95 mustang mini stock.swapped the rear end out to our old 8" because i had so many gears.now i would like to swap the front to 4 hole because i have...

I found Kentucky clutch,they built me what i wanted for $70.these guys are racers so if ya need clutch help givem a look on the internet.

thanks boportt i'l give em a try.

does anyone else besides 10,000 rpm speed make a 7.5" clutch disc for the 23 spline trans? found lots of 8.5 and 7.75 from speedway but not the 7.5".any help would be greatly apreciated.

yeah i thought about it,but i have to buy some to try,and thought someone might be able to save me from buying several pair to find ones that work.are the 87-93 spindles the same as 94-04 or will...