|
|
Search:
Type: Posts; User: citiracer
Search:
Search took 2.78 seconds.
-
About to load a late model into an enclosed trailer for the first time. I realize I need to get a steering wheel out to the back of the car by extending the steering column. What's the most cost...
-
We've always run 92s but it seems everybody else is running 90s these days. How much difference is there really in feel and, more importantly, is there anything really there on the stop watch.
-
I’m looking for smooth power for slick track conditions but just enough to at least not be lapped traffic in the rare instance we have hammer down conditions. So my target HP is in the 650-700...
-
For a Gen-X car, I'm being told that the Genesis shock is the only way to go with this.
What is the magic in the Genesis shock and why can't it be done with another brand with the correct valving?
-
When is the right time to use the 14" bottom right bar versus the 16"?
My thoughts would be shorter bar for shorter track but my thinking could be off.
Also, when would you ever use the 18"...
-
We have tried moving the 5th coil out but every time we do the car picks up an on-throttle push and seems to not hook up the rear end as well. With that said, the rear end won't hook up at all right...
-
MasterSbilt Smackdown
604 Crate motor
Left 53.8%
Rear 53.8%
LR Bite 65
4-bars all in neutral positions (middle holes) except we go down on the bottom left bar when it gets slick.
J-bar at 8” on...
-
I guess our intent in going to the softer RF is to get the car upon the LR more by pinning the RF.
We definitely improved since going from 450/400 to 400/350 and some "trusted advisors" are telling...
-
Then maybe I don't want to go to a softer RF. I don't want to give up more forward drive given that we're already struggling in that category.
-
We used to run 500 LF and 400 RF but at the recommendation of a reliable source we went down to 450 LF and 350 RF. The car is much better now but we are being told to go even softer on RF. Should...
-
Sorry I made a mistake on the crank material.
This Dart 427 short block deal comes with 4340 crank and con rods.
It looks/sounds like a good package. The Dart SHP blocks are only rated by Dart up...
-
Kicking around the idea of "building" a motor. I would like to start with an assembled short block and turn it into about 650HP wet sump so that it could be used in a modified or late model. ...
-
Refresh my memory, how much gap should there be between the flywheel and the idler gear when disengaged? What is the acceptable range?
My idler gear has recently started grinding real bad as it...
-
Dynoman,
How do I get a set of your crate headers?
-
Believe it or not, I would like to harden (not soften) a tire.
Without the use of chemicals...
Has anybody had any luck doing this? I thought about just soaking in cold water overnight. Not sure...
-
We have a Sweet rack and KRC pump.
We have been using Sweet's power steering fluid but I know that has to be something else with their label on it. What can we use that can be purchased locally...
-
Has anybody run into any problems getting the heims to line up correctly with the 5/8" bolts on the brackets?
No matter where we thread the heims, they will simply not line up. Off anywhere from...
-
I understand that I'll need a bronze gear.
I guess I'm more concerned with just making sure I have enough spark.
And do I need to just plug the vacuum advance?
-
Looking for suggestions for a good HEI distributor. What's the best bang for the buck.
-
Will this one work okay in a 604?
ARP134-8701
-
Is there a noticeable difference in using these versus the standard ones at 1/4 of the cost?
-
On a 602/604, is that a 1/8" NPT? I can't remember.
-
Sounds like WMF is not doing much business if they have shut down their website and won't answer their phone. How do I get in touch with this Kent Taylor fella'?
-
Thanks talclipse. That brings me to another question. Where do you get the bearings and is there a part number for them?
Also, do you have a phone number for WMF? I've searched and searched and...
-
Looking at getting a new set of aluminum bearing birdcages for next season and these are priced right especially since a sponsor of mine is a Lane/Motorstate dealer and will get them for me at their...
All times are GMT -5. The time now is 09:14 AM.
|
|