|
|
Search:
Type: Posts; User: dmstang
Search:
Search took 0.44 seconds.
-
Hi, I'm looking into ways to restore vacuum during low rpm. Does anyone make high bleed lifter or instructions how to modify a regular hydraulic lifter into a high bleed lifter? This is for Ford 2.3...
-
Yes victory circle is located couple hours away and I know of 2 VC cars for sale locally but they're asking lot.
How important is it having a local builder since all offer tech support online? I...
-
Currently driving mini stock and would like to move up to super late model in California. Looking for a used 4 link car and was wondering which one to look for and which one to stay away from.
...
-
Does anyone makes those fast bleed lifters? I googled them and couldn't find much info for ford 2.3
-
Track rules states engine must pull 12" vacuum at 900 rpm. This is a new engine with new schneider cam, The guy (Jerry) who sold me the cam confirmed that it will pull that much.
What will cause...
-
Currently I'm using 6 blade flex fan and I'm thinking it's too much of a drag on the engine. I believe rules allow electric fan, would it make any difference if I used electric fan?
I also use...
-
Rules doesn't allow adj cam sprocket. The one I have from speedway motor is lousy.
If I used adj sprocket, will the E bar remain flat while I turn the crank counter clockwise to advance it then...
-
Just purchased stock appearing cam sprocket with 10 keyways from speedway motors and it didn't come with any instructions. No timing marks on the sprocket, I installed it and attempted to figure it...
-
rear 47% before race, 46.9% after race. Street tire, Cobra cooper 195 60 14 all around with 1/4" larger stagger on RR, can't sipe tire.
Also car handle better on lower groove, looser on med and...
-
This is a new build car, 2 races on it and it feels fine in the feature until the end when it become loose at corner exit. I was able to keep up with the leader the whole race. Looks like I'm going...
-
How does changing the ride height affect handling? Currently my mustang is higher on the left side and I would like to switch and make it higher on the right side.
Right now car is 52% left side,...
-
I need some advice on building head with vacuum and compression rules. Track rule is 12 inch at 900 rpm for 3 minute and 180 cranking compression on a stock head only. Jerry at schneider cam suggests...
-
-
Looking for pinto transmission with 1.97 or 1.99 ratio. Will pay shipping or pick up.
please help me out. Thanks.
-
Can I put 5.0 t5 transmission into my 2.3 car? I'm interested in 1.99 ratio.
-
Yes I counted the spline and measured it but it came out at 11/16 inch and 36 spline so I'm not sure whatever to order 5/8" or 3/4"
Please help me out. Thanks.
-
I'm ready to order steering rack u joint for my mustang, what size? In the speedway motors catalog, there is couple sizes to choose from. My is a power steering if that makes any difference. Also it...
All times are GMT -5. The time now is 05:05 PM.
|
|