Search:

Phone # mine is 831-801-7103 we will take the ones you have left

It's 6lbs lighter then gloss black 4by10 sheet

had a similar issue only to find out the machine shop did not install the plug (looks like a freeze plug) in the back of our callies crank , they have it special sized so a standard one from an auto...

shocks are key on a b-mod, what type are you running? and whats the angle of your left trailing arm? also is the rear end in square?

how much clearance should you have between fuel cell and the quick change will help too?

PEM has them in stock for 60" centered i belieive its a 24" tube on there website

1 1/2 to 1 5/8 longer than what you ran with a 9" i think . winters website has all the different housing's measurement information

i get all my sheet metal tools from bodybuilderraceequipment.com really really nice stuff

it was a combination of how they were turning the aftermarket clips and using aftermarket new lowers that very 3/4" where the lower ball joint location is. stock stuff passed tech with no issues...

12 1/2 " from axle centerline

consistant laps are there, just wondering if the brake floater is creating an issue because the way it reacts depending on the body roll at the time of brake application i would think if on the...

run less wedge go to 30-50 lbs

a brake floater on left rear , clamped to birdcage or welded to housing? pro's con's

i have used the harbor freight variable speed 7" polisher ($40) for 2 years now no issues with 36 grit disk

i have had good luck with one yellow and one blue in the slick, replaced them every 4 races

4 ohlins canister shocks for sale lf,rf,lr,rr. These shocks have very few races since rebuild and have not been ran since checked on the dyno.

$1500

can send pictures to e-mail or your phone....

also have 5 JRI SL-10 shocks for sale with coil over kit.

I have 10-Integra non shrader valve Stealth series shocks for sale, just off the dyno and checked out all in good shape. I have all the 6" per second numbers on them. 4 of them are a set of base...

mine was a 34" left axle 36" right back in '05 swing arm car , sorry dont know over all width , after a year i shortened the right to 35" if that helps

my shocks are still for sale, should have bought them. and you would not have gotton screwed over

still for sale , or trade ???

winters housing, 4:86 ring and pinion , 33' left and 35'' right tube lengths, comes with axles and a pinion plate
$ 450 call (831)801-7103 -Andy . can send or e-mail pictures. possible...

use a 1050 spring adjust preload to get 1 1/2 inches of travel

Hawk DTC-30 in rear and DTC-05 in the fronts best results used with new rotors!!

Late model md3 nose