|
|
Search:
Type: Posts; User: MBR Performance
Search:
Search took 1.32 seconds.
-
You want the shorter axle with the bolt. I always ground the head of the bolt to a slight point so that's all that touched in the center. I would run a short bolt all the way in on the right axle and...
-
https://www.syracuse.com/news/index.ssf/2014/08/glenn_donnelly_creating_better_dirt_racing_empire_synthetic_dirt.html
-
Ed Feree owner of Frankland Rears tried this with very mixed results and eventually abandoned the idea.
-
It's not uncommon to see mixed parts. There are plenty of Afco shocks with Ohlins pistons out there.
-
Where are most guys running there RF? Inboard or outboard on the lower?
-
That bolt can be smaller since it is in double shear not single.
-
They were still developing the car and he was basically the test pilot. Wouldn't sell one until they were satisfied everything was right. I always applauded them for that rather than come up with...
-
The only ones in 09 were driven by Ray Cook
-
Please explain how they made it up to him?
-
13 5/8" for a gen x is pretty much the sweet spot. You need to lengthen the top and bottom rods to put the LR back in the same spot as if it had 13" that way you are just gaining bar angle along with...
-
Are you allowed to run bump stops?
-
No need to increase the static load. The dynamic load is what you need to increase. Add spring rubbers to the RR to achieve that. Start with one and work up from there
-
With R2C not in business anymore what are guys running for filters? I'm not a fan of the oil soaked filters.
-
The NRM has been out since at least 2012. The narrow has been out since inception then they added the NRM wide.
-
Price reduced to $4,000.00
-
What are you guys using on your LR and what color bump stop on it? Single bump or stacking?
-
Price reduced to $5000.00
-
Valves and retainers are Xceldyne titanium, springs are PSI.
-
Ford D3 Heads and matching intake. Heads have valves and springs included (600 laps on valves and springs) also included are machined spacers so heads can be ran with either 9"or 9.2"block. $5,500.00...
-
#32 Billy D!ckson Mastersbilt/Stine
-
ISO Ford Roush/Yates D3 heads. New or used. If used no more than 1 season old. Ask for Mike or leave message 814-591-6209 or PM me on here.
-
Could someone please provide me with the phone number for Andy Durham race engines? Thanks in advance.
-
Are there many guys still running the Strange Oval axles?
-
Just move the (not a nice word)(not a nice word)(not a nice word)(not a nice word) shock and spring back in front of the LR. Doesn't cost anyone a dime.
-
I'm interested how it performed also.
All times are GMT -5. The time now is 12:31 PM.
|
|