Search:

604 crate on hoosier m100's. whats the best pullbar to run on a fairly slick track?

2005 harris 4/4 spring behind 16" 200lr 13"200 rr 600lf 650 rf

running the j bar 1" below pinion(quickchange) with 6 1/2" of rake in it and can not get car to roll over at all; car has no sidebite whatsoever. If i lower the frame side giving me 4 1/2" of split...

sent a pm also. thanks

the long preload lr spring is inherently pushy when getting on the gas. make sure you get the car rotated before getting back on the gas

sorry not at this time, will sell all for $3200

dart shp block, 4.145 bore, lunati 3.625 stroke crank,(mains .010, rods .020) 6.00 oliver rods, comp roller cam,comp roller lifters. needs pistons. Brodix -10 aluminum heads, isky springs, crane...

dart shp block, 4.145 bore, lunati 3.625 stroke crank,(mains .010, rods .020) 6.00 oliver rods, comp roller cam,comp roller lifters. needs pistons. Brodix -10 aluminum heads, isky springs, crane...

2005 harris, what upper a arm lengths on left/right side?

does anybody have a setup book for this car, looking at buying this car to get my feet wet in a crate but don't want something with no help available. The current owner took it on trade and has no...

you can get adapters that bolt to the spindles to use metric calipers

Thanks that helps alot

i've got a mid 90's harris mod with less than 20 races on it, i plan on converting it to a super stock type car. the stub has holes for the steering box and pitman arm relocated further ahead than...

had this problem when i put new quartermaster discs in an ace clutch. for whatever reason they were just a hair to big and wore grooves in the round spacers between the front and rear cover.

anybody running a heavier RR spring than the LR? I know it goes against common logic but i know of a couple cars doing this with success on the dry slick.

was the reused between rearends?

I was given a volley 2 barrel carb that is stripped where the air cleaner stud screws in, is there a good repair for this? ( it is the bigger stud already, takes a 1/2" nut.

I've got an ace 5.5" triple disc clutch with new quartermaster discs. clutch worked fine for practice and heat race, got in car for feature and clutch wouldnt release. checked it in the garage the...

i dont think there are any cone shaped springs, i think all the springs are the same

same heigth spindle but used a different bearing

a metric frame is the same no matter what body style is on it.

I rarely agree with stockcar but he is right in this case

what are the absolute best iron heads for a 410cu. in. roller cam, 13.1comp., open intake, open 2 barrel(c&s 890) carb.

pictures? of the components you are selling? pictures?

where are the links to pics of some of these parts?