Search:
Type: Posts; User: Fireracer18
Search:
Search took 0.51 seconds.
-
I have an 06 rayburn overrail 4 bar running all steel motor need suggestions on springs I have been in contact with rusty schlenk on this as well just want various opinions currently have 500 lf 325...
-
08 rayburn overrail combo car on 4 bar what's good j bar length and how high on frame
-
Thanks for the reply any idea on upper a arm lengths
-
Anyone know what length upper a arms and do I need a 1 inch drop rf lower plan on running it as a 4 bar
-
thanks jking24 looking at a lower left crooked bar probably 13 inch
-
need to know lengths of bars I need running upper 18 1/4 and 18 3/4 and lowers 15 and 15 1/2 need buy new bars and don't know what to get
-
-
Got a set of those for my 04 rayburn looking for a starting gas pressure for each its 6 inch front stroke and 8 inch rears
-
It has Rayburn rear end birdcages lift arm Rayburn bar lengths was ran with a jbar and a pullbar
-
Picked up a Rayburn 4 bar has grt 4 bar brackets has purple spindles have some questions what size rack does it take has aluminum birdcages from a grt need bar lengths generally a set up to try ride...
-
This my first rocket I've had so just trying get everything square set up book is ordered does any one have a parts ccatolog for rocket parts
-
Should I still run the 8 1/4 upper rf arm with the spacers or should I go longer
-
OK thanks seen other cars that had shock mount in normal location on rf lower was curious
-
05 black front rocket got a rf lower one piece arm rocket part number LA 3004r-5 or something like that appears to have the shock mount dropped my lf doesn't have that both are the bushing style...
-
Finally got time to take the pull bar off tonight took it apart no spring inside so guess now I'm needing to bye a spring for it and once I get the spring is there anything to adjust as far as preload
-
Swingarm4life it has a lift arm and 6 the coil with a pullbar
-
OK that makes sense is there any adjustments to it and do u unhook it to make adjustments to the car
-
Rather not call Rayburn any one have a picture of a Rayburn pull rod
-
Have 04 Rayburn with 10 updates came with pullrod installed does it require a spring on it any info would be helpful
-
Bert makes a one piece flywheel coupler for a external 400 think part number 318-400 its like 200 bucks I have a standard bert coupler and flywheel already just didn't know if it would work with a...
-
Anyone else have experience with this any help or wisdom
-
Rcj thanks for reply the plate is like .100 thick Bert makes a external 400 flywheel its like 200 bucks or try an use a balance plate with a reg Bert flywheel I always have one or two shims to shim...
-
I have a 406 SBC that's externally balanced can you use one of those balance plates with a bert flywheel and coupler
-
Looking for Bert part Number 320-400 for external balance 400 or a Bert 311-400 let me know the crate external is different
-
Would you stick with current springs had suggestion of putting 550 on rf and 600 or higher on lf
All times are GMT -5. The time now is 02:53 AM.