Search:

We have used Ball Splines for many years now. We have ALWAYS used type F automatic transmission fluid in them. We have never used grease on the splines, as it will hold on to dirt and dust. We do...

I dont know if its right or not, but we have about 2 3/4" showing in our car. It has 3 seasons on it and its working great.

We have used one for 2 years now. It works really well. Easy to read with blue back lighting. It nounts easy by riviting a bracket to the dash and then place it in the mount with velcro. Easy to wire...

Many of them you see are being wrapped with a neon vinyl. I talked with a few of the plastic dealers at IMIS and they are not making the plastic in the bright colors. It is being wrapped by the teams...

DBR starters in Collinwood TN. My team has used them for a couple years now with no problems. (931) 724-9201, his name is Kevin. Give him a call he will hook you up. Great guy to work with.

We like the aluminum hex shaped tubes from PPM. Light weight, yet the hex shape dont let them bend easy. However they will give before a spindle does.

There is one for sale at this link for $700

http://www.midsouthforums.com/viewtopic.php?t=99040

Our Dominator is rock solid. We used the MD3 up until last season, its a good nose. However we switched to the Dominator last season due to the looks of the nose. We soon found out that the Dominator...

I have a 09 Warrior swing arm car. It is very similar to the Rayburn 104 under rail cars. We do much of our adjusting with the LR bar on the car. I have learned that moving the LR bar down really...

Congrats Rusty... Keep on pluggin away man!

Go to www.e85carbs.com The mans name is Rob Mix. Great guy, great product.

Actually we got a few of them last year and they were fine. We checked them out with our durometer and they were right were they should be. As far as we could see they were just as good as our other...

You can call me @ (256) 856-8638.... Mark

Will consider trade for 383 crank and 6" H-beam rods

Will consider a trade for a 383 crank and 6" H beam rods

Back up top

back up top...

I have a Dart little M block that I will sell. It has 350 journals and is turned .060 in the cylinders. I bought this engine last season complete. I ran it thru the end of the season and a rule...

I have a Dart little M block that I will sell. It has 350 journals and is turned .060 in the cylinders. I bought this engine last season complete. I ran it thru the end of the season and a rule...

We had the same problem this year when we put in the new engine. Turned out to be our master cut off switch. To check that just bolt the two cables together that go to the master switch. If it cranks...

We use these. www.dbrstarters.com They are a smaller company, but build a quality product and are widely used here in the southeast.

You more than likely have a piece of trash stuck in the needle valve. Pull it out of the bowl and flush it out real well with carb cleaner then reinstall and reset the float level. You should be...

I dont know where you are located. But we have the same vacuum rule here in south TN/North AL. Call a man named Ed Nix @ Nix Machine & Balance. He is a master at these cams and has some in stock....

The carb will be checked by a drop in, go/no go gauge. The carb will not be removed to tech.

When running a 2Bbl engine, what change should you make in the cam. I guess the question I have is... Our engine rules call for 2 Bbl carbs, however the cam rule is unlimited. If I a have cam that...