Results 1 to 15 of 15
  1. #1

    Default

    wel, I cant get 4m admen to help. I have sent about 4 or 5 messages to them.

    I though i would post this and see if any one could tell me whats wrong.
    I get an error when i open this site and when i view others post. here is the error that i get. thanks for any help.

    Your submission could not be processed because a security token was missing.

    If this occurred unexpectedly, please inform the administrator and describe the action you performed before you received this error.
    4m.net - The Most Opinionated Racing Message Board In The Universe
    Last edited by jr18; 02-17-2011 at 08:19 PM.

  2. #2

    Default

    This was posted on a thread about Security Token. It seems to fix the problem. I don't remember who posted it, but it works.

    OK, here it is, unofficial as possible....
    IF you are still getting the security token error, here is what to do....
    Once you do get in, along the top edge of the forum is where it says
    new posts, private messages, etc.... go to 'forum actions' and under
    that is 'general settings', click on that button....
    Scroll down to the 'date and time options'
    Go to where it says 'DST Correction Option'
    Set it so it says "DST Corrections always off"
    At the bottom, click "Save Changes"
    Close the window, come back to 4m and see if it works....
    The original point and click interface was a Smith & Wesson

  3. #3

    Default

    Thanks H3Fan,
    That was easy.

    I don't know why the admen could help me.

  4. #4
    Join Date
    May 2007
    Location
    central IL
    Posts
    3,698

    Thumbs up

    Quote Originally Posted by jr18 View Post
    Thanks H3Fan,
    That was easy.

    I don't know why the admen could help me.
    They did not respond to anyone that I know of....
    I was just lucky and came across the 'cure' and it worked....
    Glad to have helped fellow 4mers....
    Racenut Rambles on Facebook

  5. #5
    Join Date
    Aug 2009
    Location
    cleveland tn
    Posts
    250

    Default

    that worked.
    mind freak (chuck greer)

  6. #6
    Join Date
    May 2007
    Location
    Annapolis Md
    Posts
    285

    Default

    Worked for me also.

  7. #7

    Default

    Racenut, I tried to use you quote to reply but I can't get it to work. So thank you for helping us. I couldn't remember who posted the help.
    The original point and click interface was a Smith & Wesson

  8. #8
    Join Date
    May 2007
    Location
    central IL
    Posts
    3,698

    Talking

    Quote Originally Posted by H3FAN View Post
    Racenut, I tried to use you quote to reply but I can't get it to work. So thank you for helping us. I couldn't remember who posted the help.

    I have found on the 'reply' and such buttons, it works best to double-click on the button, then if that don't work in a few seconds, click again and it normally will work....
    Racenut Rambles on Facebook

  9. #9
    Join Date
    May 2007
    Location
    South Shore Ky
    Posts
    1,231

    Default

    Thanks for the help!!!!!!

  10. #10
    Join Date
    May 2007
    Location
    Central Illinois
    Posts
    29

    Default

    Add me to the list of people you helped. Thanks

  11. #11
    Join Date
    Mar 2008
    Location
    Cartersville,GA
    Posts
    493

    Default

    thanks...worked for me too!!

  12. #12
    Join Date
    Jul 2010
    Location
    Georgia
    Posts
    1,023

    Default

    Quote Originally Posted by H3FAN View Post
    This was posted on a thread about Security Token. It seems to fix the problem. I don't remember who posted it, but it works.

    OK, here it is, unofficial as possible....
    IF you are still getting the security token error, here is what to do....
    Once you do get in, along the top edge of the forum is where it says
    new posts, private messages, etc.... go to 'forum actions' and under
    that is 'general settings', click on that button....
    Scroll down to the 'date and time options'
    Go to where it says 'DST Correction Option'
    Set it so it says "DST Corrections always off"
    At the bottom, click "Save Changes"
    Close the window, come back to 4m and see if it works....
    Worked for me, thanks!!!
    "If racing were easy, everybody would do it."

    #77 Leon "Slick" Sells

  13. #13
    Join Date
    Dec 2007
    Posts
    1,039

    Default

    Worked for me toooooo, thanks a bunch!
    Gill T. Azell

  14. #14

    Default

    worked here too.

  15. #15
    Join Date
    May 2007
    Location
    London Ky
    Posts
    87

    Default

    thank you, works great now

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 03:00 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.