Does it matter the location of the brake caliper when floating the lr? If so, what ate the affects of having it the different locations?
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 3 of 3
Thread: brake floater
-
11-23-2010, 06:03 AM #1
Junior Member
- Join Date
- Jan 2010
- Posts
- 23
brake floater
-
12-01-2010, 12:09 PM #2
Member
- Join Date
- Dec 2010
- Posts
- 49
It doesn't make a difference. The floated brake doesn't know where the caliper is located, it only knows the pressure it transfers to the chassis when the brakes are applied. Just place them for clearance and so that the bleader is higher than the line in.
Last edited by 28m; 12-01-2010 at 12:10 PM. Reason: Puncuation
-
12-01-2010, 06:15 PM #3
Member
- Join Date
- Jan 2009
- Posts
- 97
Just make sure that the swedge tube is long enough so that the caliper can not relocate itself to the front of the axle...I have mine mounted at about the 2:00 position with the car at ride height.
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 02:50 PM.
Bookmarks