Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2010
    Posts
    16

    Default 01 Mastersbilt left rear adjustment

    does mastersbilt make an adapter plate to change from four hole adjustment to a seven hole? something like rockets long to short bar plate.

  2. #2
    Join Date
    Jan 2008
    Posts
    1,910

    Default

    i'll sell ya kit for it, it contains as follows

    steel plate
    qty of 1, 5/8" drill bit

    $300
    you just got greased
    http://www.goddardwarrior.net

  3. #3
    Join Date
    Sep 2010
    Posts
    16

    Default

    how much does it shorten the bars, what effect does it have in the rough conditions, what bar angle do the holes need to be located?

  4. #4
    Join Date
    Jun 2007
    Posts
    3,123

    Default

    Quote Originally Posted by lazermod3 View Post
    i'll sell ya kit for it, it contains as follows

    steel plate
    qty of 1, 5/8" drill bit

    $300
    That kit wouldn't work. The holes are 1/2" on the 7-hole plates. 5/8" holes were used on the 4-hole plates.
    Mastersbilt will sell you the hardware if you want to weld everything up yourself. Unless you know what you're doing, I wouldn't go fabricating the plates since you won't know where the holes need to be. It doesn't change anything in terms of bar length, just gives you more adjustability.

    If you're looking for setup info, check the setup sheets:
    http://mastersbilt.com/setups/5010.pdf

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 07:00 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.