Was doing some reading and seen where integra said that you can clamp your lr front shock on a clamp and leave you other shock behind with the spring on it and run it like that for real slick conditions?? Is this the same as running clamped with the shock with a spring on it in front??
 |
||||||
 |
||||||
|
||||||
|
||||||
|
||||||
|
||||||
 |
Results 1 to 6 of 6
Thread: 4 link setups
-
03-03-2011, 05:30 PM #1
Senior Member
- Join Date
- Apr 2008
- Location
- virginia
- Posts
- 195
4 link setups
-
03-05-2011, 06:56 AM #2
Senior Member
- Join Date
- May 2007
- Posts
- 787
Shock and spring in rear and just shock only on clamp in ft. So when axle rotates whelp left car on lr
-
03-05-2011, 02:08 PM #3
Member
- Join Date
- Mar 2010
- Posts
- 72
When it slick`s over real good,i have mine clamped up with 200 psi in the shock,work`s good
-
03-05-2011, 02:54 PM #4
Member
- Join Date
- Jun 2007
- Posts
- 52
Where can I look to see a pic of the clamp bracket??
-
03-05-2011, 03:56 PM #5
Senior Member
- Join Date
- May 2007
- Location
- Dakota, IL
- Posts
- 3,594
Its an excellent set-up. I ran it with alot of success. I've got a few nice used clamp brackets left if your needing one. Call me 815-990-8865
-
03-06-2011, 06:25 PM #6
Member
- Join Date
- Jun 2007
- Location
- OZ
- Posts
- 82
What valving to you guys typically run when you use this setup, for both the shock on the clamp and with the spring behind?
Would a 7-2 in front and 5-3 behind be too aggressive?
Reply With Quote
Posting Permissions
All times are GMT -5. The time now is 09:17 AM.
Bookmarks