Results 1 to 2 of 2

Thread: Carb question

  1. #1
    Join Date
    May 2008
    Posts
    233

    Default Carb question

    We fired up the motor this weekend and while idling, there was fuel dripping slowly out of the primary boosters. We shut it off and popped the site plug and fuel just poured out of it. We haven't adjusted the bowl level since last season so I don't think it's too high. Is this a bad needle valve?
    I don't believe fuel pressure is an issue here. We're only running a 6-9 PSI pump.

  2. #2
    Join Date
    Jan 2009
    Location
    Waterloo, Alabama
    Posts
    321

    Default

    You more than likely have a piece of trash stuck in the needle valve. Pull it out of the bowl and flush it out real well with carb cleaner then reinstall and reset the float level. You should be fine...
    "Doc"
    Dowdyracing.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

All times are GMT -5. The time now is 04:53 AM.


Powered by vBulletin® Version 4.2.0
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.